The remote control for my screenplay pro has stopped working, the battery is relitively new so thats not the problem

this remote will learn infrared codes for any device. click here:
http://www.amazon.com/gp/product/b00385xug0/ref=as_li_tl?ie=utf8&camp=1789&creative=390957&creativeasin=b00385xug0&linkcode=as2&tag=candlesource-20&linkid=wvo5lrk6a5db2sz3

turn ur hard disk from the power switch behind the hdd. hold it for 3 secs and then it will detect on ur mac. do not turn on the hard disk with the remote control

Confirm that the ScreenPlay Director is correctly connected to video input on your TV set.
Make sure the ScreenPlay Director is connected to power and turned on.
Make sure you have selected the correct video input on your TV to display output from the ScreenPlay Director.
The video output setting on the ScreenPlay might not be correct for your TV. Press the TV SYS button on the remote control repeatedly until the screen displays normally.
Try on a different TV, you TV may not be supported with this device.

There is an internal component that has failed on the remote. Replace the remote and your issue will be solved.

Thanks for using Fix Ya.com.

Call iomega and buy a new one,try searching on e-bay for one or go to a friend of yous and ask his and copy it to a universal remote control

have u tried the tv sys button on the remote ? reperat a few times as it cyclels thru the formats. or the source button. first disconnect the usb
-will power

Hi there

It might be a small IC that has gone on the Powerboard , I wouldn't worry about it if I were you.

A bit unusual for the projector to stop responding to the remote. Usually it follows when someone has opened the projector, they forgot to reconnect the controls from the case top which also includes the IR receiver. If it isn't that, it could be a broken IR pc board or bad connection. I've seen that.

The worst case is that the IR controller on the main board has failed and if that's the case, you'll have to live with it as the cost of a new board is very high.

on the universale remotes it tells you on the back of the package what tvs it will and wont work with.