Question about Epson TM-U295 Matrix Printer

Open Question

I have hardwear proplem that i need service manual for Epson TM-U295

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 415 Answers

SOURCE: Epson TM-U295 Matrix Printer light printing

You need to adjust the print head spacing. This is a lever along the side inside the printer by the print head. It just move the head closer or further away from the paper. The closer it is the harder it strikes the bottom pages and it should print darker on them. If you get it too close it can catch the paper and cause a jam so you have to give it a bit more space. You may end up redoing this if you use a different brand or type of nc form paper. Just open the cover look for a lever on the side and lick it a notch (should show circles so go to the smaller one) and try printing. You might have to waster a few pages before it behaves but this is all you need to do.

Posted on Sep 02, 2011

  • 5102 Answers

SOURCE: i need a user manual for a Epson TM-T88II POS Thermal Receipt Printer M129B

Epson has the manual for the TM-T88II here: http://content.epson.de/fileadmin/content/files/RSD/AnwenderhandPDFs/DE/TM-T88II_user_e.pdf .

I hope this helps.

Cindy Wells

Posted on Feb 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson TM-U295 Matrix Printer light printing problems The paper i use is 3 sheets, 1 original and 2 copies, the copies no longer print clear, i have tried changing the ribbon but this only improves the...


You need to adjust the print head spacing. This is a lever along the side inside the printer by the print head. It just move the head closer or further away from the paper. The closer it is the harder it strikes the bottom pages and it should print darker on them. If you get it too close it can catch the paper and cause a jam so you have to give it a bit more space. You may end up redoing this if you use a different brand or type of nc form paper. Just open the cover look for a lever on the side and lick it a notch (should show circles so go to the smaller one) and try printing. You might have to waster a few pages before it behaves but this is all you need to do.

Sep 02, 2011 | Epson TM-U295 Matrix Printer

1 Answer

Epson TMU-295 prints in condensed mode with Windows 7 from web application while the same printer prints the same output in normal mode with Windows XP. How comes?


window is not the faulty one if you are using a third party software of sent print option from internet then problem must be with in drivers..... print a self test page if ok then print test page from system (control Panel) if both point ok then there must be problem in online software/ERP.

Aug 11, 2011 | Epson TM-U295 Matrix Printer

1 Answer

Only 8 lines are priting


You will need to install the correct diver for the printer for it to recognize the capabilities it has. Some require the page break for the seams to be set. Some printers have a mark to put the page break on when loading the paper. The printer may not be set for "continuous paper feed" and only printing a single page according to where it thinks the page break is.

Mar 06, 2011 | Epson TM-U295 Matrix Printer

1 Answer

I have an Epson TM-U295 I don't know how to use it. Is there a manual or guide so I can use it at a scalehouse?


download the manual here:
http://okcoal.tripod.com/sitebuildercontent/sitebuilderfiles/u295o_e.pdf

Aug 30, 2010 | Office Equipment & Supplies

1 Answer

Tm-u295 firmware problem?


I can solve that problem but i need some help in the firmware of TM U220B. I just need the .bin files to downgrade to version 1.02

Feb 18, 2009 | Epson TM-U295 Matrix Printer

2 Answers

Epson TM on Windows XP with serial


you need to use the printer cable that was design for the printer. if you don't have the cable anymore, then you have to take the commercial cable apart and reconfigure in accordance to page 43 of the manual call outs.

Besides the cable, the printer software is only good for Windows 2000. Windows XP will not work unless Epson provide you with the printer driver. (which I did not see on the website).

all in all if you must use this printer with Windows Xp. you need to create a file in Autoexec.bat to enable the printer and allow the USB to connect to the printer.

that is going take time to do. if you need help on that. please post the request here.

Thanks

Dec 03, 2008 | Office Equipment & Supplies

1 Answer

Installer Problem


please go the www.driverguide.com
and install the driver

Mar 28, 2008 | Epson TM-U295 Matrix Printer

1 Answer

Printing


You mean you want to see or put a page number on the document you're printing?

Feb 26, 2008 | Epson TM-U295 Matrix Printer

Not finding what you are looking for?
Epson TM-U295 Matrix Printer Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...