A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I think the vnetbios.vxd error is because the PC once seen a network connection (LAN) which is no longer present. The only way I ever cleared this was to put the LAN card back (Once seen - NEVER forgotten - It seems). This however is not causing your CD problem! Try this and get back: -
With PC off disconnect the CD from IDE.
Re-boot and interruptstart up to go to BIOS settings.
Ensure that your hard drive is the ONLY IDE device present and that it first device on first IDE and MASTER.
Re-boot and allow 98se to start normally.
Go to "Device Manager".
If there is still a CD device present - delete it. If not - continue.
Shut down the PC.
Re-connect the CD and re-boot.
Interrupt again and go to BIOS settings.
Ensure that you have Hard drive as First device (Master on first IDE) and CD drive as second (Slave on first IDE).
check your IP address
In Windows XP
Start>Run>cmd, click Okay
In the Black window Type
ipconfig>enter This should give you a IPADRESS ex: 192.168.1.1
in the black window type
Check the ping statistc package sent package received package lose
If you get 4S,4R,0L you have a internet connection
If you have a internet connection and can not display the web page. you might have a browser issue
Tyry resetting IE to default setting
Disable the SCSI1HLP.VxD using the Microsoft Configuration Utility:
Restart your computer, press and hold down the CTRL key while Windows is starting, and then choose Safe Mode from the Startup menu.
Click Start, click Run, and then type msconfig in the Open box.
On the Static VxDs tab, click to clear the Scsi1hlp.vxd check box, click OK, and then follow the instructions to restart your computer.
NOTE: By following the steps below, any device that uses the Scsi1hlp.vxd file may not function properly or you may not be able to restart your computer. Some SCSI devices and some ATAPI devices use this file. If you are not sure if your hardware uses this file, check with your hardware manufacturer before you proceed.
Rename the Scsi1hlp.vxd file in the Windows\System\Iosubsys folder:
Restart your computer, press and hold down the CTRL key, and then choose Safe Mode from the Startup menu.
Click Start, point to Find, and then click Files or Folders.
In the Named box, type scsi1hlp.vxd, and then click Find Now.
In the list of found files, right-click the Scsi1hlp.vxd file that is located in the Windows\System\Iosubsys folder, and then click Rename.
Type scsi1hlp.old, press ENTER, and then restart your computer.