Question about Tao XM2go Satellite Radio Receiver

1 Answer

Will not play all channels

I can only get a few channels on my Tao. I don't know how to set to get all channels.It used to work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It was just a simple refresh via the internet. thanks

Posted on Jun 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound comes out of radio?


Turn up the volume by pressing the top of the center cluster of buttons. Does it work in the home dock or car dock without headphones?

Nov 23, 2012 | Tao XM2go Satellite Radio Receiver

1 Answer

My tao xm2go unit is transmitting a very weak fm signal to my car radio. I can barely hear the audio.


You likely need to directly connect. In most cases the FM transmitter is too week to broadcast through FM stations, and a direct connection will clear up your issue. It could be as simple as connecting via an Auxiliary cable or Cassette Adapter. If you don't have the ability to use one of those, you can get an Auxiliary Input Adapter. Another solution would be an external FM Transmitter, with a larger range.

Jun 26, 2012 | Tao XM2go Satellite Radio Receiver

1 Answer

How do I get to radio tune


Turn XM Roady2 'on' using the POWER switch. Go to MENU and go the FM Frequency. Select your frequency of an empty channel in your area, then turn off the Roady2 using the POWER switch. Do NOT do this by turning the car on and off as it tends not to save any settings when you do that. Always use the POWER button. Also, the website 'Radio-Locator' has a utility that will help you find an EMPTY FM channel in your are for your XM radio to use! Good luck and let me know how it works out for you- okay?

Jun 12, 2010 | Delphi Roady2 SA10085 XM Radio Receiver...

1 Answer

My Tao xm2go quit working. I've tried re-setting it. I've replaced the battery, I double checked that the charger is putting out the correct voltage with a multi-meter. it won't turn on, either with the...


Try plugging the power adapter directly into the bottom of the radio without using either base/cradle - wait a minute - then see if you get a battery indication.

Jan 18, 2010 | Tao XM2go Satellite Radio Receiver

1 Answer

My tao xm2go will not turn on


Dear Glen,

My Tao solution is to buy the Delphi MyFi which appears to have an identical interface. See page 10 here: http://file.xm411.com/manuals/MyFiUserGuide411.pdf . This is expensive but service in not available.

digitally,
(/\/\<erwin

Nov 21, 2008 | Tao XM2go Satellite Radio Receiver

1 Answer

Atenna connection when using Altec Speaker or Car Kit


Dear xm2go,

I could not find any service options for my own Tao XM2go unit. The only option appears to be the Delphi MyFi unit which appears to be identical (see page 10 here: http://file.xm411.com/manuals/MyFiUserGuide411.pdf )

digitally,

(/\/\<erwin

Oct 07, 2008 | Tao XM2go Satellite Radio Receiver

1 Answer

Antenna Connection Problem


I have the same exact problem. I took a small needle nose pliers and pressed the antenna connection on the TAO radio. I put it back into the cradle of my Altec Lansing amplified speakers. It works again. For how long we will see.

Sep 05, 2008 | Tao XM2go Satellite Radio Receiver

1 Answer

Tao won't start


Dear Jim,

My own Tao unit is dying as well. Servicing does not appear to be available. The only solution I have found is to buy the Delphi MyFi unit which appears to use an identical interface (see page 10: http://file.xm411.com/manuals/MyFiUserGuide411.pdf ). What a bummer!

Digitally,
(/\/\<erwin

Jul 29, 2008 | Tao XM2go Satellite Radio Receiver

1 Answer

Display of recorded programs does not match the program playing


There is a very small reset button under the back cover. You will need a small paper clip to reach the button. It is located in the upper left hand corner. The button is not under the batt., it is about 2" above the screw on the side. I don't know if this will solve your problem, but it should reset your radio to its default settings. Good Luck!

Apr 29, 2007 | Tao XM2go Satellite Radio Receiver

2 Answers

Xm2go stuck at preview channel 1. if other channels are selected it bounces back to channel 1.


I had a what sounds like the same problem. More than likely you need to "reset"(our account with XM Radio. (Your radio have stop communication with xm except for channel 1) You can call XM or go to XM'S website. If you have not setup your account for internet usage you will have to do so before you can manage (reset) your radio. Once you reset your radio it may take up to 1 hour before it works. My radio took about 15 min. Good luck

Jun 22, 2006 | Tao XM2go Satellite Radio Receiver

Not finding what you are looking for?
Tao XM2go Satellite Radio Receiver Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tao Home Satellite Radios Experts

isaac johny
isaac johny

Level 3 Expert

796 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

John
John

Level 2 Expert

473 Answers

Are you a Tao Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...