Question about Belkin Computers & Internet

2 Answers

How can i change password for my router - Belkin Computers & Internet

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Hi, There are 2 passwords used in routers.

First is the WEP/WPA key used for wirelessly accessing the router.

  1. type routersetup (or the address to access your router) in your web browser
  2. Click on Security under the Wireless heading
  3. Type the Security Password in (if there is one) and login
  4. Change Your Password
The Second is the Security Password used for changing the settings
  1. Type routersetup (or the address to access your router) in your web browser
  2. Click on System Settings under the Utilities heading
  3. Type the Security Password in (if there is one) and login
  4. Change the password
  5. Save
NOTE: if you have forgotten the Security Password, you may need to do a hard reset. Use Google to find out how to do this

-AC

Posted on Nov 08, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Belkin Master
  • 32,281 Answers

You have logged this under Belkin router, if so then follow these instructions.
If not you will need to get back to me with the make and model of your router because different router manufacturers have different ways of resetting their routers back to the factory settings.

Unplug all LAN cables from the router.

Unplug the router power cord connector from the back of the device.

Using a paper clip press the reset hole, press continue to hold the reset button, then carefully reinsert the power cord.

Hold the reset button in for at least 15 seconds then release it. After approx 15 seconds the router will boot up and with factory default settings.

The Belkin configuration IP address is 192.168.2.1

The default the password on the router is left blank.

Posted on Nov 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want change my liksys roter password E900.can any help me please My no is 0506327008


Please click EDIT and remove your phone number. No one here phones anyone except the 'crazies' who are tuning in!

All the information is online. videos in the main link at the bottom.

  • Linksys E900 Default Password - About.com Tech pcsupport.about.com > ... > Linksys Default Passwords 2016-04-07 · Find the Linksys E900 default password, ... your Linksys E900 (N300) router. ... on the bottom of the router. Be sure to change the default router ...
  • Linksys: Changing the Wireless Network Password for Your ... kb.linksys.com/Linksys/GetArticle.aspx?docid=67993c06bf0c4b1f... We would like to show you a description here but the site won't allow us.
  • Linksys Official Support - E900 Frequently Asked Questions www.linksys.com > Home > Support E900 Frequently Asked Questions. ... Username and Password of the Linksys Wi-Fi Router, E900? ... so you do NOT have to call your ISP to change the registered MAC ...
  • Linksys Official Support - Linksys E900 N300 Wireless Router www.linksys.com > Home > Support Linksys E900 N300 Wireless Router ... Login & Password. Changing the router's wireless network name and password using ... Changing the Linksys router's ...
  • Linksys Official Support - Changing the router's wireless ... www.linksys.com > Home > Support ... E1550, E1700, E2000, E2100L, E2500, E3000, E3200, E4200 v1, E800, E8350, E900, ... Linksys router name or password. ... change your wireless network's password ...
  • Linksys E-Series Routers User Guide downloads.linksys.com/.../E_Series_UG_E900Rev_3425-01486_Web.pdf · PDF file Linksys E900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... How to change your router's name and password . . . . . . .
  • Solved: Linksys E900 router - Page 2 - Linksys Community
  • Go to Bing homepage

    Jul 10, 2016 | Cell Phones

    2 Answers

    Change my belkin router password want a diffrent password


    Connect to the router via a cable.
    Open CMD (command) prompt and type:
    iconfig
    you will see a default gateway listed - write the ip address down.
    Open internet explorer and enter the gateway address into the address bar.
    Should open a web page to configure the router.
    You may have to provide a password.

    If you're only interested in wireless password change, select different pages until you get to the wireless stuff.

    Try this site:
    http://techchannel.radioshack.com/change-security-settings-belkin-wireless-router-1402.html

    How to Change Security Settings on Belkin Wireless Router

    Feb 11, 2015 | Belkin Computers & Internet

    1 Answer

    Need new password


    Which opetaing system and is the password to log on to your computer or an internet connection password ?
    How to change your windows password using the command line
    http://www.askstudent.com/hacking/how-to-change-your-windows-password-using-the-command-line/

    Change a Network Password

    A network password is a combination of alphanumeric characters that users must enter in order to access a local area network.

    Wireless routers use this password to protect the network from unauthorized users who could potentially steal bandwidth from the network, access sensitive data and view the information being sent to and from the network's router.

    To change your network password, you must log on to the router's URL and access its security settings.

    Type the router's URL into your web browser.
    To access and change any settings on your router, you must log in to the router's URL.

    This will allow your computer to communicate with the router and access the router's main page. When accessing the router's URL, use the same computer that was used to install the router.

    If you do not know the router's URL, look for this information in the router's manual or on the manufacturer's website.

    After entering the URL into the web browser's address bar, press "Enter" or click the "Go" button on the browser.

    Input the router's default username and password.

    Once you enter the router's URL into your web browser, a dialog box will appear requiring you to input the router's username and password. (Note that this password is not the network password.)
    Unless you have previously changed the router's username and password, input the defaults.

    Many routers have the default username of "admin" and have the password set as "password" or have no password at all.

    To find out your router's default username and password, check the documentation that came with your router or check the manufacturer's website. Click "OK" to proceed to the router's main page.

    Access the router's security settings.
    Depending on your brand of router, there will be tabs or links on the router's main page.

    One of these will contain the page for changing your security settings.
    Find and click the link or tab.

    This page will contain several textboxes, one of which will contain the SSID (name of the network) and two textboxes for changing the network password.

    Select an encryption type and change the network password.
    Most new routers offer WEP (Wired Equivalency Privacy) security or WPA security.

    Select the type of security and change the network password by typing in a new password in the two text boxes.

    When you are finished, click "OK."

    Save your changes and log out.

    After changing the network password, you must click "Save" or "Apply" to keep the password change.

    Log out of the router by clicking the "Logout" or "Exit" link on the router's main page.

    If you leave the main page open for a certain period of time, you may be logged out automatically.

    Mar 25, 2014 | Computers & Internet

    1 Answer

    Router light turned into orange after changing password.


    Hi Shaifali,
    No worries!
    - Can you log back into the router? with the new password or with the old one?
    -Has your router been totally re-setted to factory defaults?
    - I think you have changed the PPoE connection password which is the internet link password to ISP instead of the router password?

    Let me know these questions and I will help you resolve this issue

    Feb 27, 2014 | Belkin Basic Wireless Router

    1 Answer

    How do I change the password on my Linlsys 192.168.1.1 router?


    Open the setup page of the router.
    Go to Administration tab.
    There you will find the place to change the router password.
    Change the password, confirm it and click save settings.
    It will log you out. Re-login with the new password.

    See Linksys router password

    Mar 02, 2012 | Computers & Internet

    1 Answer

    Reset password to the router and get a new one


    Are you trying to reset the router password or wireless network password?
    Wireless network password is different than router access password.
    To change the wireless password, you will need to access the router page and change the settings.
    See how to find wireless network password
    To change the router access password, you can log in to router page and go to administration tab. There you will find the place to change the router password.

    Jan 09, 2012 | Linksys WRT120N Wireless Router

    1 Answer

    I want to change my network password


    Hi

    Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Type the router's URL into your web browser. To access and change any settings on your router, you must log into the router's URL. This will allow your computer to communicate with the router and access the router's main page. When accessing the router's URL, use the same computer that was used to install the router. If you do not know the router's URL, look for this information in the router's manual or on the manufacturer's website. After entering the URL into the web browser's address bar, press "Enter" or click the "Go" button on the browser.
    Input the router's default username and password. Once you enter the router's URL into your web browser, a dialog box will appear requiring you to input the router's username and password. (Note that this password is not the network password.) Unless you have previously changed the router's username and password, input the default ones. Many browsers have the default username of "admin" and have the password set as "password" or have no password at all. To find out your router's username and password, check the documentation that came with your router or check the manufacturer's website. Click "OK" to proceed to the router's main page.
    Access the router's security settings. Depending on your brand of router, there will be tabs or links on the router's main page. One of these will contain the page for changing your security settings. Find and click the link or tab. This page will contain several textboxes, one of which will contain the SSID (name of the network) and two textboxes for changing the network password.
    Select an encryption type and change the network password. Most new routers offer WEP (Wired Equivalency Privacy) security or WPA security. To create a password using letters and/or numbers, you must choose the WPA security setting. Change the network password by typing in a new password in the two textboxes. When you are finished, click "OK."
    Save your changes and log out. After changing the network password, you must click "Save" or "Apply" to keep the password change. Log out of the router by clicking the "Logout" or "Exit" link on the router's main page. If you leave the main page open for a certain period of time, you may automatically be logged out of the router.

    Oct 16, 2010 | Computers & Internet

    1 Answer

    When i set up the router i gave a password but


    If you want to change the password to access the router you can open your browser and put in the address 192.168.1.1 (unless you changed it) and press enter. You should be prompted for a user name and password. Leave the user name section blank and put in the password for the router. Once you have logged into the router successfully, you will see the Administration tab. Click on it and you will be able to change the router password. Save the changed and close the browser window when you are finished.
    If you need to change the Wireless Internet password, you can click on the Wireless tab, go to Wireless security and change the passphrase there too.
    I hope this helped. Thanks for using FixYa.com!!

    Apr 18, 2010 | Linksys WRT54GP2A-AT Router (WRT54GP2AAT)

    1 Answer

    I am trying to install an HP 7460 wireless printer to my HP cpu via a linksys router. My password for the router is 7 letters, and the printer says it has to be 8 letters. How do I change the router...


    When accessing the router’s web-based setup page, a log-in screen will appear asking for the router’s password. The router’s default password is “admin.” You should change the password for security purposes.
    The router’s password must be changed to:
    • Prevent unwanted users from accessing the router’s web-based setup page.
    • Enable Remote Management.
    The router’s IP password can be changed by:
    • Running the router’s setup CD.
    • Changing it on the router’s web-based setup page. For instructions, please follow the steps below.
    Changing the Router’s Password
    Step 1:
    Access the router’s web-based setup page.
    NOTE: If you are using Mac to access the router's web-based setup page.
    Step 2:
    When the router’s web-based setup page appears, click Administration.
    Step 3:
    Enter the new password on the Password and Re-enter to confirm fields.

    Sep 26, 2008 | Office Equipment & Supplies

    1 Answer

    CHANGE PASSWORD/ETHERNET ROUTER/WINDOWS VISTA


    to make it clear..
    change password meaning you need to update your router's password?
    SOLUTION: access router's interface and enter correct password information
    OR
    change password meaning reset your password for your router?
    SOLUTION: call router provider/manufacturer ISP to have router's password reset..

    Jul 17, 2008 | Alcatel Speed Touch Home Modem

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    139 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Belkin Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2260 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18394 Answers

    Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...