Question about Audio Technica Artist Series ATM410 Professional Microphone

1 Answer

FORGOT ATN PIN

I CANT REMMERMER MY ATM PIN

Posted by on

  • Anonymous Sep 22, 2008

    my name is khosa and i want to know my secret atm pin four digit number

×

1 Answer

I want to know the secret atm pin number

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I wire an Astatic 636l for an Yaesu Ft101zd?


At transceiver:
Pin 1: ground/PTT common
Pin 2: mic +
Pin 3: PTT NO
Pin 4: not used

At the mic, I think:
Pin 1: shld&blue
Pin 2: white
Pin 3: red
Pin 4: black

Sep 19, 2014 | Astatic 636L Noise Canceling Microphone...

1 Answer

Heil icm plug wiring diagram


The Heil "ICM" microphone is designed to be used with certain Icom brand ham radios. These have a 8-pin round plug. Describing the pinout to you will depend upon your perspective, whether you are looking at it from the microphone plug itself, or the microphone socket on the front of the radio. Therefore, from the perspective of looking at the mic plug on the end of the mic cable, note that there is a notch or dimple in the plug that also lines up with the screw. Going clockwise from the notch, the pins are numbered 1 thru 7. Pin #8 is the center pin.
Pin 1 = mic input
Pin 5 = Push-to-talk (PTT)
Pin 6 = PTT ground
Pin 7= Mic ground

From the standpoint of an Icom transceiver, the remainder of the mic connector pins are as follows:
pin 2 = +8 volts DC (output from the radio)
pin 3 = frequency control up/down
pin 4 = squelch switch
pin 8 = audio output (level varies w/vol control)
Hope this helps

Jan 03, 2014 | Heil Sound Microphones

1 Answer

Pin configuration for a shure slx1 transmitter


Pin 1: Shield
Pin 2: 5 volts bias
Pin 3: audio
Pin 4: Loading resistor (connect pins 3 and 4 together when using a condenser microphone.)

Sep 16, 2010 | Shure SLX1 Body-Pack Transmitter for...

1 Answer

Properly connecting the mic cable to the pins. my mic is currently in a state of repair due to the absence of the original cable.


For low impedance A3F/A3M, two wires with Shield
Pin 1 is ground/shield
Pin 2 is hot or +
Pin 3 is cold or -

For high impedance A3F/A3M, one wire with Shield
Pin 1 is ground/shield
Pin 2 is hot
Pin 3 is not used.

Feb 21, 2010 | Microphones

1 Answer

Heil microphone gm series wiring diagram to suit kenwood ts 450


Hi,

This is the pinning of the GM-series.
pin 1- Ground / shield
pin 2 - Mic (audio)
pin3/4 - PTT

On the 450 the next;
pin 1 - Mic (Audio)
pin 2 - PTT
pin 7- Ground (Audio)
pin 8- Ground (PTT)


Good luck,
Gerard

Jan 21, 2010 | Heil Sound PR-40 Professional Microphone

1 Answer

Unidyne III how to connect to computer atm its got a connection and wire that would go into a amp i need an adapter so i can put it into my comp to recored help please


Your computer PROBABLY has a stereo input so you want to drive both channels from the mic.

Radio Shack has the exact cable for your needs: PN 55030269

You won't like the price, but that should solve your problem.

Dec 27, 2009 | Shure 545SD UNIDYNE III All Purpose...

1 Answer

Sears roadtalker ssb 40 channel


if your talking about the Sears Roadtalker 40 am only model I got ya covered...its the same pinout as the radio shack 5 pin dins...here is the order
Pin 1 = GND
Pin 2 = Not Connected
Pin 3 = transmit
Pin 4 = Audio
Pin 5 = Recieve
Hope this helps you..

May 14, 2008 | Microphones

Not finding what you are looking for?
Audio Technica Artist Series  ATM410 Professional Microphone Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Technica Microphones Experts

Brad Brown

Level 3 Expert

13516 Answers

Rick

Level 2 Expert

611 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Are you an Audio Technica Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...