Question about EliteGroup P4VXASD (P4VXASD-R) Motherboard

1 Answer

Problem with changing Graphics Card

I have a P4VXASD motherboard that I am currently using a AGP TNT2-VANTA graphics card, and it works fine with low end games and graphics. I wanted play higher end games such as LEGO Star Wars and LEGO Indiana Jones, so I found a used e-GeForce 6200LE, 256Mb DDR2 graphics card and installed it. The monitor would not receive any data, it seemed that the pc would not boot, or basically not work with this graphics card.
So I thought that the card was just bad.

Today I found a supposedly new and unused Diamond Stealth S85, 128 Mb DDR graphics card new in box, and it is doing the same thing.
Is there something that I need to configure on the motherboard to used these cards or are these just to much card for this motherboard?

As I wrote, I could not get the pc to communicate with the monitor, the monitor was acting like it could not receive the data, so I could not get into the BIOS or anything.
Thanks for any advice.
Daljaxon

Posted by on

  • Anonymous Apr 24, 2009

    i can not install radeon 9200 on ecs p4vxasd motherboard

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Ur mobo doesn't support that kind of agp cards this is what ur mobo does support so make sure u get this :
Graphics Support: AGP 4X, Max Unbuffered SDR SDRAM: 1024MB

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motherboard problem


The video card that you choose for your system largely depends on your requirements. If you use applications that are very heavy on the graphics, then you should consider a PCI express video card with SLI capabilities. However, if the most graphics intensive thing you plan on doing on your computer is watching a usb 3.0 pci cardDVD movie, then you don't really need one that's very powerful, any standard one should PCI Express card do. In many cases, you might even be able to make do with the card that came with your system.
If you're interested in purchasing a new video card, then it's important that you examine the current capabilities of your motherboard. usb 3.0 pci express card The older motherboards support only one graphics card at a time through an AGP slot. Motherboards today do not support AGP cards. Today, the new standard is PCI express, usb 3.0 pci card which has recently replaced AGP as the favoured graphics

Jun 25, 2013 | Nvidia Bios Chip:ecs Geforce6100pm-m2...

1 Answer

P4vm800m7, processor Intel we need VGA drivers t o downloads


http://download.cnet.com/%7Bvalue=http://www.download.com/msi-nvidia-based-graphics/3000-2108_4-10162298.html
Available in this download are the latest drivers for the following nVidia-based graphics boards: NVIDIA RIVA TNT, RIVA TNT2, RIVA TNT2 Pro, RIVA TNT2 Ultra, Vanta, Vanta LT, RIVA TNT2 Model 64, RIVA TNT2 Model 64 Pro, GeForce 256, GeForce DDR, Quadro, GeForce2 MX, GeForce2 MX 200, GeForce2 MX 400, Quadro2 MXR, Quadro2 EX, GeForce2 GTS, GeForce2 Pro, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 420, GeForce4 MX 440, GeForce4 MX 460, Quadro4 200NVS, Quadro4 400NVS, Quadro4 500XGL, Quadro4 550XGL, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4200, GeForce4 Ti 4400, GeForce4 Ti 4600, Quadro4 700XGL, Quadro4 750XGL, Quadro4 900XGL. The drivers now include support for AGP 8x. These drivers must be installed by a user with Windows 2000/XP Administrator privileges.

Jun 23, 2011 | Mercury P4VM800M7 Motherboard

2 Answers

What kind of agp card is compatible with motherboard?


any AGP is comparable with any motherboard that has agp slots. depending of what you wana buy..
the card that you might want to buy has to say AGP slot.

Feb 22, 2010 | EliteGroup P4M800-M7 Motherboard

1 Answer

I bought Foxconn 755A01-6EKRS Motherboard for my HP pc replacement. i install my AGP VsionTek x1300 graphic card and turn it on and nothing show up on screen...then i put the graphic card back to my old HP...


Your new Foxconn motherboard Primary Graphics Adapter settings in set to onboard vga that is why there is no display in your monitor. Do not install yet your agp video card. Use first the onboard vga of the motherboard.
Power up your computer and go to the BIOS settings. Locate in bios about the Primary Graphics Adapter settings and then select AGP. Save changes and the exit. Turn off your computer and now install the agp video card.

Dec 16, 2009 | Foxconn 755A01-6EKRS Motherboard

1 Answer

Compatible graphics card for intel d875pbz motherboardboard


Actually the ATI 8500 agp gard should run just fine on that board use to have the same board and I set it up with this card and it ran great

Jan 03, 2009 | Motherboards

2 Answers

Bad graphic


Your motherboard only supports AGP. You can use any AGP graphics card that supports up to 4X AGP. nVidia and ATI make great cards as well as other manufacturers that mak boards using nVidia and ATI chipsets. I would recomend a card with at least 512MB of memory onboard. I hope this helps.

Lou

Sep 04, 2008 | VIA ASRock K7VM3 Socket A/...

1 Answer

GRAPHICS CARD


That motherboard and videa card connect using the AGP standard so you are quite limited to what video cards you can get without upgrading the entire system. Also, since your system is that old getting a modern graphics card will not help much as the processor (CPU) will limit it greatly.

nVidia has not released an AGP card in a few generations but they did have some back with the 7600 AGP. ATI released an AGP version of it's last generation of cards with the HD3850.

I personally think you are wasting your money and should consider upgrading your entire system if you are planning an playing any games. I would suggest getting the cheapest AGP video card you can find say a GeForce 6200 or Radeon X1550. Don't spend more than $50 or $60.

Remember that it must be AGP to fit on your motherboard. Another thing to consider is that any AGP video card you buy for you current system will not work in any new computer.

Aug 22, 2008 | Asrock P4i45PE Motherboard

1 Answer

Trying to change out graphics card


i think its youre power supply, try getting a new one youll need to buy one with more volts.

or might be you damaged youre computer with static electricity

Jun 15, 2008 | EliteGroup P4VXASD (P4VXASD-R) Motherboard

1 Answer

Graphics card


Hi Harikris, no you can not install just any graphics card. You're Intel D845GLLY board uses an onboard graphics card. (It's an AGP graphics card).
If it's you're intention to install a new graphics card you must use a PCI graphics card. (Understand that the AGP onboard graphics is faster than a PCI graphics card). However, the PCI cards do use their own memory. (Which fee’s you're system memory to run windows.
The Intel D845GLLY has 4 PCI (White) slots, onboard. You can add a video card into the system. You're onboard video card does use you're system memory to function. If you're PC has 512MB of system memory & you're video card is set to use 128MB of memory. Than you're system is left to run with 128MB. One would think you're system is running a little slow.
The Intel D845GLLY motherboard can use up to 256MB of system memory. You can set the amount of system memory in the bios as shown on page 49, table 18. In you're manual. If you do not have you're manual you can download it from here: http://www.intel.com/support/motherboards/desktop/d845glly/sb/cs-008853.htm
May I suggest you increase you're system memory to 1GB. Than increase you're graphics memory to 256MB. You're system will run faster & so will you're graphics card. These older Intel motherboards require memory current for you're board. Click this link: http://www.memory-up.com/Memory/IntelD12696.html
If you still feel that you want to use the slower PCI graphics card you can choose from any listed on this link: http://www.newegg.com/product/ProductList.aspx?N=2000380048+1069609642&Submit=ENE&SubCategory=48&nm_mc=KNC-GoogleAdwords&cm_mmc=KNC-GoogleAdwords-_-NA-_-NA-_-NA
You will also need to change a setting in you're bios to boot to the PCI card instead of the AGP onboard card. Page 49.

Good Luck!
M

Jun 04, 2008 | Intel D845GLLY Motherboard

1 Answer

GeForce4 MX 420 Video Card


First question: Are you sure you have a PCI card?
there are several points here:
Make sure you have the monitor connected to the correct output on your computer. (In this case to the output of the graphics card, not to your onboard output)
If you have a PCI card set bios to PCI
Setting it to AGP means the computer is looking for a graphics card in you AGP-slot on you motherboard.

I cannot help thinking, that you actually have a AGP card in a AGP slot and that you computer is not working on onboard, but on AGP. But you can check which graphics device is used, in display properties (right-click Desktop, Properties, Settings)

Please post some feedback

Apr 04, 2008 | VIA P4MA Pro Motherboard

Not finding what you are looking for?
EliteGroup P4VXASD (P4VXASD-R) Motherboard Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an EliteGroup Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...