Question about GE 21028GE3 Cordless Phone

1 Answer

Phone won't work

Our phones were working fine. Now, all of a sudden they have no dial tone and are displaying a message on the display that has the letters VCL2. Any suggestions?

Thanks

Posted by on

  • 3 more comments 
  • vishu30 Jun 22, 2008

    Yes we too have the same prbl . All of the sudden phone dial tone is not working . WE get the ring but can't hear or reply.
    Can anyone let us know what to do?

  • dfh4 Jun 28, 2008

    Same problem. No dial tone. Phone rings when you call it. People can hear you talking, but you can't hear anything ont he GE phone. Even without dial tone you can call out and people can hear you, but again you can hear nothing. All 4 phones i have linked operate the same way now. It's as if the base is not transmitting any of the incoming voice signals to the headsets. About ready to junk the whole system at this point.

  • Anonymous Jan 31, 2009

    Same here, although I can use speakerphone between the handsets (like an intercom), so the handsets seem to work fine.

  • dunklinco Feb 20, 2009

    after electrical shut down for a fe hours there is no dial tone on either of the three hand sets. what's wrong?

  • Anonymous Feb 27, 2009

    after power outage no dial tone

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Our phones were working fine. now after an eight hour electrical shut down, no dial tone.

Posted on Jun 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AVAYA Merlin Magix phone system powers on, all phones have blank display but have message light blinking, no dial-tone, key press = no sound, adjust volume rings phone and displays on screen.


if you have it plugged into an outside line and do not have a dial tone call your phone company .but when buying stuff at an auction , well you get what you got even if it's old and none working

Feb 21, 2016 | Phones

2 Answers

No dial tone and "line in use " message


the wire that is used to connect the line to the telephone is not proper...

Mar 02, 2008 | Panasonic KX-TG6071M Cordless Phone

1 Answer

Phone displays error message "check tel line


The phone is not detecting dial tone on the line. Are you able to hear a dial tone? If not - disconnect the cable at the phone and plug into a different phone. If it works, then the problem is with the Panasonic phone - if it doesn't work - the problem is with the cable, jack, wiring, etc.

Mar 12, 2015 | Panasonic Phones

1 Answer

What does a boken dialling tone on my phone mean? It is all working fine and there are no warning messages on the display.


Usually broken dial tone means the line has call-forward set. You get broken tone for 3 or 4 seconds, then goes back to normal. Are you receiving incoming calls normally? It's common to set or cancel 'cause the code might kinda match a number you use. And it may be forwarded to nowhere, example, you dial 729-1111, but press 72#-1111. You might be forwarded to 1111, the code being 72#. The 1111 goes nowhere, someone calls you, calls gets forwarded, then they get a message"that number does not exist". If that's the code for your area, then 73# might be the cancel code. Check the front of the original phone book, or Google codes for your service provider.

Jun 11, 2014 | Panasonic KX-TG4500 Phone

1 Answer

Phone not working


Hi Pam,
Try these..1...remove your telephone line from base unit and fix it into a working land phone and check whether is it having normal dial tone.If it's having engage tone(beep beep...)remove paralleled phones and re connect to cordless base unit.
2.If line is ok (normal dial tone with full volume) & still display indicates line is busy, your main base unit must be having faulty components inside.Commonly these defects happen in thundering or surges through telephone lines.You have to take full set to a repair shop.
Rana.

Dec 28, 2013 | Gigaset As300 Twin Dect Cordless Phone -...

1 Answer

The waiting light on the phone won't shut off. When the voicemail is dialed there is no tone and the messages can't be checked.


The waiting light is a MESSAGE light. Press MESSAGE and look at the display. It tells you where the message came from and the 3rd soft key will let you CLEAR the message.

Carl

Jul 11, 2011 | Panasonic KXDT343 Phone

2 Answers

One of my phone is stuck in search mode what do i do it i a vtech 6772.It is a three phone combo other two phones work fine


HI, To switch back to tone dialing, hold down the SELECT button for couple of seconds. The display on the base unit will read PU indicating pulse dialing. Now press and hold SELECT to change it to TN (Tone dialing).
thank you,
vijay

Sep 29, 2009 | Vtech Two Line Digital Answering Machine...

2 Answers

No dail tone


Check the cor and cos setting of the phone It shold have the permissions to call outside

Dec 02, 2008 | RCA 25414RE3 Corded Phone

1 Answer

Semi Dead Panasonic KX-TGA100N with ''C533'' displayed.


Panasonic KX-TG1050N Cordless Phone. Base handset (No. 1, KX-TGA100N) does not work, no keypad response or dial tone. Green indicator message light ON (should only work with the TG1000N base unit) all the time till battery runs down. Display shows message ?C533?. Can still send and receive calls on extension phones 2 and 3.

Nov 11, 2008 | Panasonic KX TG1000N Cordless Phone

Not finding what you are looking for?
GE 21028GE3 Cordless Phone Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96738 Answers

Cindy Wells

Level 3 Expert

4762 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...