Question about DISH Network 322 DTV Receiver

1 Answer

One tv is working fine, another one is frozen on [aquiring a signal]. its been this way for an hour; what do i do?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • DISH Network Expert
  • 286 Answers

Hi there! My name is Becki Barned with Dish Network Customer Service. The first thing that you want to do is unplug your receiver from the power source for 10 seconds. If this doesn't work, and your issue hasn't been resolved, blog back, and I would be more than happy to help you from this point!!!! If you have any other questions/comments, blog back also, or you can also reach us on Twitter!!!!!!

Posted on Dec 24, 2010

Testimonial: "thanks. I finally got it going again[little trial & error]"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung SP-P4231 plasma television works fine for several hours and then the picture gets all wiggly and impossible to watch. If we shut the tv off and wait an hour or two and turn it on again, it works...


The tv main Tuner signal board have intermittent problems,sorry this problems it could be anythings wrong in the board as parts wise are dying in the tv Tuner signal board just not completely,that why it take times to show up,that the board where the tv incomming broadcasting signal cable plug into it.U can take things aparts and putting it back together again?Yes.Try website like Ebay.com to buy a refurbish main Tuner signal board for the replacement.Or take to the shop for the repair that it.

Apr 19, 2011 | Samsung SPP4231 42 in. EDTV-Ready Plasma...

1 Answer

Installing a vip211k and can not aquire signal, have 722 that works fine


Hello, Daniel Busa with Dish Network customer service here. If you have signal loss, the best thing to do is to unplug the receiver for ten seconds and plug it back in, then check the cabling. If that does not the issue give tech support a call at 1800-333-3474

Jul 04, 2010 | DISH Network ViP 211 DTV Receiver

1 Answer

Dish Network 322 will not work both TV's at the same time. If TV1 is on it works fine, but TV2 says aquiring satellite signal. If TV2 is on it works fine, but TV1 will say aquiring satellite signal. Both...


Hello! Dan Busa with Dish Netywork here intermittent signal loss like that is usually caused by some sort of glitch a hard reset ( unplugging it for ten seconds ) will usually resolve this. If your signal strength is at or above 80 that should be fine, but keep in mind you need good signal strength on both the 119 and 110 satellites ideally you should be at 70 .

Jun 25, 2010 | DISH Network 322 DTV Receiver

1 Answer

My tom tom ONe cannot get a valid Satelite Signal just stays wait


If you are indoors then move outdoors to get a signal.

If you are outdoors then move your location by a few yards and sometimes it will suddenly aquire the satellites.

Happens occasionally with my unit. I normally set a route up then start driving and it suddenly starts to work OK.
HTH
Peter

Mar 07, 2009 | Tomtom ONE GPS Receiver

1 Answer

Can't get picture


Hello matthew95765,
The TV is working, the message is coming from the dish box. What you need to do is to determine if the dish box is connected to the dish and that it has signal at the box, because the message it is delivering to the TV is that it is not receiving signal from the satellite. so you have to check the connection at the satellite and at the box because those are the only point that can generate the error you are getting.
I hope this helps,
Thank you,
Shuttle83 

Jul 23, 2008 | SVA-USA SVA HD4208TIIIBU 42" Plasma...

1 Answer

Unusable signal


Had the same problem unplug the tv for hour. Had ours at the tv repair shop and it worked fine there brought it home now we have a great picture but no sound.

Jun 01, 2008 | RCA P52930BL 52" Rear Projection...

1 Answer

Mitsubishi VS-45607 45" Big Screen


Good Day, Delano1981;

It may cure the problem but I would suspect the 9 Volt source
CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01 AND
IC2P01 PART # 270P466020 (9-VOLT REGULATOR). BOTH
ARE ON THE SIGNAL PCB.

This should resolve your TV"s condition.

Good Luck, big IRISH.

May 27, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Freezes up while in use


Coincidentally I had exactly the same problem yesterday. Use the reset button behind the silver faceplate. Instructions in the manual. Mine now works fine and I didn't even lose my preset destinations.

Sep 20, 2007 | Garmin StreetPilot C330 GPS Receiver

Not finding what you are looking for?
DISH Network 322 DTV Receiver Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...