Question about Weslo Cadence Ct 5.8 Treadmill
Hi, disconnect the plug from the wall, remove the saftey key, check if the on/off switch is on off and the circuit breaker is on off.
also very important if you are using an extension wire make sure all of the wire is out. wait 5 mins!
now switch the power button onto the on position.
do the same with the circuit breaker, switch it to the on position.
plug in the power cord and switch on. now reinsert the key hopefully this should have started your treadmill.
also make sure you give it aleast 5 mins when you have the wall unpluged!
Posted on Nov 11, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 19, 2014 | HEALTHRIDER Pro H450i Treadmill HRTL61706
Dec 17, 2013 | Exercise & Fitness
Dec 09, 2013 | Horizon T203 Treadmill
Dec 02, 2013 | Exercise & Fitness
Nov 28, 2013 | Precor 935 Premium Series Treadmill
Nov 13, 2013 | Cadence Exercise & Fitness
Oct 07, 2013 | Exercise & Fitness
Jul 15, 2013 | Landice L7 LTD Executive Trainer Treadmill
the reset switch on the underside of the treadmill console. Usually
the button is large enough to trigger with a pencil eraser or Q-tip.
Plug the treadmill plug back into the wall. Use the Q-tip to press
the reset button. It may be necessary to hold the reset button down
for a few seconds. "CL11" will appear in the display of the
reset button one more time with the Q-tip. "CL21" should
appear on the screen. Press the enter key. The display will change
again and show "CL22." Keep pressing the enter key until
the numbers cycle through to the number "CL26." Press enter
one more time. The letter E should appear on the display screen.
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset
Jan 25, 2013 | Quinton Stairmaster Clubtrack 3.0 GymTough...
Mar 31, 2010 | Life Fitness 9500HR Next Generation...
254 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: