Question about HP Compaq Presario SR2150NX PC Desktop

1 Answer

Stalling on streaming video

When streaming on the move player every 10 minutes on the dot there are two or three four second stalls. That might not seem like much of a prpblem but if you are recording it is real pain. I was wondering if it could be low memory or low processor speed? I am running an AMD 3200 xp 515 mb mem and 160 hard drive. Any help would be appreciated. P.S i have tried all of move networks suggestions (virus programs etc.)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

"Streaming" refers to playing something as it is coming from the internet. If your computer is pausing while streaming then it means you are not downloading fast enough. You can simply download the entire file before playing it if that is happening.

If you are NOT streaming, but simply playing a video and you are getting these pauses the advice you have been given is good, stop any other unneeded programs that are running, upgrade your processor, video card, or RAM. Depending on what video card you have now that would probably help the most but put in two GB of RAM if your motherboard will support it.

Posted on Apr 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 s15 jimmy starts fine but stalls out


Stalls out when and how? At start up would be security. Do a reset. Turn it on, let it set for 10 minutes off or 30 seconds. Then try to start. relearn is do this three times with out the start up. After three times try to start. 4.3 engines have a problem with distributors also. the gear is junk. Though I haven't seen then to kill the engine, it wouldn't surprise me. Need to know when it stalls..

Apr 08, 2014 | 1988 Chevrolet Blazer

1 Answer

I lost all power in a 2005 Trailblazer. Called GM and they said to kick the key forward and wait 10 min, and this would reset it. It did but now the radio A/C door locks and windows don't work. What...


Do it three times in a row.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

Here is a link about the security problem

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 12, 2011 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

How to rekey a pontiac sunfire 2004


Im assuming you are refering to the anti theft security key relearn process.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If that doesnt work, look into this link http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 07, 2011 | 2004 Pontiac Sunfire

1 Answer

How to reprogram key


1. Perform a security system relearn.

2. Let the vehicle sit for more than 10 minutes with the key off.

3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.

4. After 10 minutes, the security indicator will change state.

5. Turn the key off and wait 10 seconds.

6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

7. After the second 10 minute timer has expired, turn the key off for 10 seconds.

8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.

10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If this doesnt work, and you are having STARTING issues, go to this link.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jul 29, 2011 | 2005 Pontiac Grand Prix

1 Answer

Nissan Altima 1996 Engine stalls,it starts it only 2 hours later


is there any engine warning lights coming on if not when was the last full tune-up, plugs wires all filter's , if not or don't know ty that.

Apr 24, 2010 | 1996 Nissan Altima

1 Answer

Stalling after 5-10 minutes of driving


Cicuit 3 could mean cylinder three missing or dead.

Sep 20, 2009 | 1995 Toyota Camry

1 Answer

1997 GMC Savana stalling


HI. Had the same problem and searched for months. its pump injectors. You re looking for 1500$ part and 400$ labor.

Mar 21, 2009 | 1997 GMC Savana

1 Answer

Engine intermitantly stalls


if this a fuel injected car just check to fuel pressure first.

Oct 24, 2008 | 1994 Pontiac Bonneville

Not finding what you are looking for?
HP Compaq Presario SR2150NX PC Desktop Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...