Question about Magellan Sport Trak GPS Receiver

1 Answer

I AM TRYING TO DOWNLOAD THE CONTENTS OF MY SPORT Track to my computer, I need to know if I have thr right connector. It has the connector to the back of the sport Trak and the other end has a 9 pin connector. Whent I hook it up nothing happens.

Posted by on

  • jczaja Nov 07, 2010

    I can't find any softwear for the sport Trak but I do have a Triton 1500 and that works fine I taught this softwear would work for ant Magellan GPS, but I will try calling the number you gave me and explain the problem I am having. When I find out I will contact you again, if you have any other input please let me know.



    Jack

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

That is a serial connector, nothing really "happens" when you plug in that kind of connection to your computer. You need to have the Magellan software loaded, it then probes the serial connector looking for your device. Unfortunately they no longer have this software available for download, hopefully you still have the CD that came with the device, if so it can be loaded there. Then it will find your GPS and download the contents.

If you do not have the CD or software you will want to contact Magellan to get it, they may be able to email you a link to it, but they don't have it anywhere publicly available. Call them at 800 707 9971, they are open Monday through Friday, 6:00 a.m. to 5:00 p.m. PST/PDT.

Thanks, let me know if you have any questions or concerns, just reply to my answer here and I will be right back with you.

Tim

Posted on Nov 07, 2010

  • Tim Grayson
    Tim Grayson Nov 07, 2010

    Sounds good, definitely call to request the software, it is completely different than the one you have for your other device. Magellan will be able to provide it for you though, definitely just call tomorrow and have them send it your way.

    Thanks,
    Tim

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know how to remove fuel pump on a 2001 ford sport track


Go to this link. http://www.mysporttrac.com/MySportTrac/projects/FuelPumpReplacement.pdf

Oct 12, 2012 | 2001 Ford Explorer Sport Trac

1 Answer

I have EA sports cricket 07 game in cd .during the time of copy from cd some files cannot copy . what is my problem how i solve this


If you have the space, copy the entire contents of the disc onto your harddrive and install from there.
That should solve the problem of not finding the files. When done, delete the temp folder you put the disc contents into, insert the cd into your tray, and start the game.
BTW, have you checked the disc for any read errors/scratches etc? It only takes a careless moment to wip out entire sectors of a cd making it unreadable. you can check the disc by going to EmsaSoft, and trying a freeware program called Diskcheck from here-> http://www.e-systems.ro/diskcheck.htm

Hope that helps.
Cheers from NZ


If this helps you, don't be afraid to vote. It only takes a second, and it helps me to keep track of my solutions. Thanks.

Jun 20, 2011 | EA Sports Cricket 07 for Windows

1 Answer

Hello Support, I have a Whirlpool Duet Sport Washer and am getting an F-28 error and the door is locked so I cannot get the model number. I've tried unplugging the washer, disabling the connectors...


F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).

All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 17, 2010 | Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

I need 2 know the keys are for harry potter and thr goblet of fire so my lillte girl can play it on the pc


sorry but if you lost the keys you will need to either contact the manufacturer or buy a new copy of the game

Aug 10, 2010 | EA Sports Video Game Consoles & Games

1 Answer

WHIRLPOOL DUET SPORT WASHER FLASH FAULT CODE F28


F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).

All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question&&&&

Jun 09, 2010 | Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

Whirlpool duet sport will not work


F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).

All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My whirlpool duet sport washer says F 28... what does that mean?


F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).

All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Oct 02, 2009 | Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

Free download


It seems that you are misspelling Corel. When I enter www.corel/lexar/mo it brings me to this page:
http://www.corel.com/servlet/Satellite/us/en/Content/1150905725000

If you copy this and paste it into your browser's address bar, it will take you to the main page. Then enter "lexar" into the search bar in the upper right hand corner and it will show you all of the patches, updates, and other info on your Lexar card.

Dec 28, 2008 | Dell ResourceCD (2p730)

3 Answers

LEXMARK 3400 ALL IN ONE


paper feed pulls to the right and there is no paper jammed and the paper guide is set.

Mar 18, 2008 | Lexmark X3470 All-In-One InkJet Printer

Not finding what you are looking for?
Magellan Sport Trak GPS Receiver Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Jungle Ghost
Jungle Ghost

Level 2 Expert

154 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...