How can I change the hour on my 1360BK corded phone

Night greeting usually resides (and managed) in Mailbox 990 (Message #2). You'll need the passcode for that mailbox or your dealer will need to reset it.

can you give me more information, the phone never works. or answering always work at the same time or random

Try greetings 2, 3, or 4. One of these might be the after hours greeting.

The 1360BK sets the time automatically when the first call with caller ID information comes in. As far as I know there is no way to set the time manually.

From attendant phone(ext 100 or 101) press **1234, to get into admin programming
program 000 changes date and time

1. Press the Speaker key
2. Dial 728
3. Dial two digits for the hour (it's on a 24 hour clock so 13 would be 1 p.m.)
4. Dial two digits for the minutes (00-29)
5. Press speaker to hang up.

Hope this helps!

Depending on the type of system you have powering the 2020,this should take care of it.
Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds – enter a leading 0 for any single digit entered,
press Redial,
press Speaker.
This must be done at extension 200 – usually the receptionist phone.
For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker

Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.
If asked for a password enter the same 2 3 6 4 6.

If that doesn't work you may have the newer Compact ICS or the Modular 0x32 control unit which will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
When in programming just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, press back (lower left arrow)
Example: To change the Time & Date Press next until you see Time & Date. Then show Then Chng Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.

• Press Feature, 9 and #
• Use dial pad to enter hours and minutes
• Press Recall to change Am / Pm
• Press Hold to change Date
• Press Recall to change Day of the week
• Press # to move cursor to Date
• Enter Date
• Press Recall to change Month
• Press # to move to Year
• Press Feature button to save

fROM EXTENSION 300: Press #TD + Enter time in 24-hour clock using hours (2 digits), minutes (2 digits) and seconds (2 digits) + HOLD + Enter date using month (2 digits), day (2 digits) and year (4 digits) + HOLD + SPK to exit. This will change the time on all the phones and voice mail.