Question about NEC Computers & Internet
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are different reasons why this might happen. Let's try some. 1.) Does your board have an onboard video card, cause if it does, then XP might be using that as the primary monitor. TRy plugging into the onboard video when you start up! If that works then you need to disable the onboard video.(try disabling it in bios!) if not then 2.)When booting at the select xp or recovery console, press F8. You'll get the menu with safe mode and what not. Go down to Enable VGA Mode then press enter. If that works, go to display settings and lower your resolution then restart. But usually when this happens your monitor says "Out of Range" but u can still try Well if that doesn't work, tell me more! Regards, Armando
Posted on Apr 28, 2007
Thanks, but no thanks. I bought a X800 Pro. The card is broken after all, it's been tested on 5 different systems. And I had all right drivers and so on, I'm not a noob. Please delete this thread.
Posted on Jan 11, 2008
SOURCE: OUT OF RANGE on monitor screen
you have to change frequency of monitor to work smoothly form display property.
Out of Range is frequency is not matching
To solve this, wwhile booting Press F8 to get advanced boot menu from that select "Enable VGA mode"
change the display properties
right click on desktop - Select properties - Settings - Advanced (from bottom) - goto monitor tab - change the frequecny to default. and restart the system normal mode
Posted on May 25, 2008
Most like the sound card you have is not compatible with Windows Vista. You need to check the manufacturers website to see if there is any patch for Windows Vista
Posted on Oct 07, 2008
The drivers for XP and Vista are different. You will need to install the drivers for XP as well as Vista for dual boot operations. Make sure you install the XP driver in the XP partition and the Vista Driver in the Vista partition. This should solve the problem.
Posted on Dec 20, 2008
Tips for a great answer:
Sep 05, 2015 | NEC k 3800 mAh (OP57074402) for NEC LaVie...
Sep 23, 2011 | NEC LaVie S LS900/8E Notebook
Apr 07, 2011 | NEC LaVie S LS900/8E Notebook
Nov 05, 2010 | NEC Versa SXi Notebook
Jan 15, 2010 | NEC LaVie RX Notebook
May 13, 2009 | NEC LaVie RX Notebook
Mar 26, 2009 | NEC LaVie S LS900/8E Notebook
Mar 06, 2009 | Computers & Internet
Mar 05, 2009 | NEC LaVie RX Notebook
33 people viewed this question
Usually answered in minutes!