Question about Pride Jazzy 1113 ATS Indoor Power Wheelchair

1 Answer

I have a 1992 jazzy 1113 ats wheelchair and i accidently locked it the other problem is that the only way i can get the controller on is to plug it into the onboard charger and then a green light and a red light flash back and forth and that is is it. there is a picture of a key on the controller ,the horn works but only when plugged in. there is a fuse on the back 7.5 when i take the fuse out and plug it in the green light goes on on the onboard charger showing the batteries are fully charged but when i put the fuse in and plug it in , the light goes off and the gage goes up to 1 or 1and a half and once again i can only turn on the controller with it plugged in and i get a quick flash of the multiple light flash and then it goes straight back to a red light flash and then a green over and over. how do i unlock this controller and do i need the fuse withe the onboard controller? what the hell is going on? i also remember that my controller has two areas to plug in the wire, is it the right or the left ? send email to aimeelynn420@yahoo.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Aimeelynn I'm e-mailing you the unlock procedure for a VSI controller. If thats not what you have you can e-mail me back the type of controller you have. I will also try to answer the other questions you have

Posted on Nov 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED THE CODES


Go to Pride Mobility website/ http://www.pridemobility.com/jazzy/
and get manual for Jazzy 1113 it is found on page 31 but manual for jazzy113ats doesnt have codes. Good luck.

May 12, 2014 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

Jazzy 1113 power chair shows charged but control light is blicking. Chair will not move.


It appears that the controls are in Lock Mode. Unlocking Instructions depend on your type of controller. Go to PrideMobility.com to download the proper manuals for chair and controller.

Feb 11, 2013 | Pride Jazzy 1113 Power Chair

1 Answer

The chair is locked. I had this happen a long time ago and I needed to move the joy stick diferent directions to get it unlocked but I do not remember how. It is a Jazzy 1113.


If it is the older VSI controller, turn on chair. as the battery lights scroll, hold the joystick in the (UP) position until you hear a beep. Then immediately place the joystick in the (down) position until you hear a beep. then place the joystick in center position, once you hear the beep for the final time, it should be unlocked.

If you have a Dynamic controller, turn on chair then press the horn button to unlock.

Sep 15, 2011 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

Have a jazzy 1113. The speed profile lights flash then the chair shuts off. The batteries show full.


The flash of the speed lights indicate that you are in the charger inhibit mode and if the charger is not plugged in then you have a problem that needs to be checked by a tech or your provider that sold you your chair Sorry I don't have a quick fix

Sep 25, 2010 | Pride Jazzy 1113 ATS Indoor Power...

2 Answers

My Jazzy won't move.


If your batteries are truly charge they should read around 24.5 VDC. And if the freewheel lever is engaged and you still have no movement your probably need to get into a service tech. Also check the circuit breaker on the chair.

Mar 31, 2009 | Pride Jazzy 1113 ATS Indoor Power...

Not finding what you are looking for?
Pride Jazzy 1113 ATS Indoor Power Wheelchair Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...