Question about Whirlpool LER4634J Electric Dryer

1 Answer

I have a problem with dryer not putting enough heat out to dry my clothes.The model #ler4634jq0.The Serial# ml3372706

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 382 Answers

This may be the result of a clogged vent hose ,Go outside and check the outside dryer vent they sometimes clog up with lint and as a result send false info to the sensor inside the dryer, make sure you clear any excess lint from here, and then do same at the back of dryer where flex hose comes from rear of dryer up into wall then turn on dryer and feel at rear outside vent and see if you can feel the hot air moving more rapidly if so this should resolve your problem

Posted on Nov 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Whirlpool dryer model LER4634JQ0. It now takes many cycles to dry the clothers. I checked the vent coming out, it is not clogged. I can reach in and feel a little fan motor, which I assume...


your vent line from the wall to the outside of the house can be clogged
or your you high heat coil is burned out and just the low heat coil is working, when you switch to high, both coils work. or you have a one coil system and the heat selector maybe defective

Please rate/vote the response Thanks

Dec 20, 2010 | Whirlpool Dryers

1 Answer

Cloth dryer does not dry


check you lint filter and your exhaust, where the dryer puts the air outside
these have a tendencie to clogg as well
this will quickly slow your drying times

Oct 05, 2009 | Dryers

1 Answer

MODEL # LER4634JQ0 - the dryer spins properly without noise but the heat is not enough to dry clothes, takes forever.


You may want to try to reset the breaker.
I have a similar prob with my dryer. Something with the unit messes with the current enought to drop voltage enough to stop the heater but not the motor and it does not completely trip the breaker.
Cycle the breaker off, wait a minute and reset the breaker. That should work.
If not, it is probably the heating element.
Hope this helps and saves you money from (hopefully) unnecessary repairs.

If so, please rate me.
Thanks,
Matt

Sep 14, 2009 | Dryers

1 Answer

It takes my whirlpool dryer three or four cycles to dry clothes


Kenmore Dryers are almost all the same therefore am sending this;

http://www.youtube.com/watch?v=lHkIK8oy1K4

How to Clean a Dryer Vent Video

http://www.youtube.com/watch?v=5Dj4im31lRY&feature=related

Why is so inportant to clean the lint?

http://www.youtube.com/watch?v=9kxbF31Oh4s&NR=1

It was helpful?


May 15, 2009 | Whirlpool Dryers

2 Answers

Maytag Performa Electric Dryer Won't Start


check the blower wheel, sounds to me like it is loose on the blower motor, common on these dryers. One sure sign would be a warped filter and a rusted top. The blower aint putting out enough and the dryer is over heating .

/uploadswith image

Mar 08, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

My Dryer has stop producing heat


hi mark it the heating coil in the back of the dryer

Feb 10, 2009 | Whirlpool LER4634J Electric Dryer

1 Answer

Whirlpool ler4634jq0


The gas das't start tere for dryer goes for long time without drying the klotnes

Nov 06, 2008 | Whirlpool LER4634J Electric Dryer

2 Answers

Dryer does not get hot enough to dry clothes Roper REX4634KQ1 Electric Dryer


Most common cause of this is a clogged venting going to the outside to test this remove the vent from the back of the dryer and run a load if it drys ok them you know you have a venting issue and will need to be cleaned out if not plz repost and we can look deeper into it

Jul 15, 2008 | Roper REX4634KQ Electric Dryer

Not finding what you are looking for?
Whirlpool LER4634J Electric Dryer Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal DeAngelo

Level 3 Expert

2183 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...