Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

1 Answer

60cm Ultima DWF70 Free Standing

My dishwasher has just stopped running and a Code AL03 is flashing on the display. I have cleaned the filter and can't see what the problem can be. Any ideas, please?

Teresa

Posted by on

  • twinkster Dec 07, 2008

    I also have the code A03, having checked the book its either the Thermistor OR a blockage in the filter which seems to be what it is as it is fine until it goes to empty the water. I have cleaned all of the filters but thats not solved it, does anyone know where I can find a diagram of the machine so that I can get to the filter that the engineer would get to and clean it myself rather than having to pay for someone else to do it for me!

    Thanks and Merry Christmas!


  • johnshad75 Feb 24, 2009

    i have got the AL03 code flashing and the filters have been cleaned

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,036 Answers

Hotpoint code A03 is a short circuit on the temperature thermistor.

This will need replacing, or there is a fault with the supply wires leading to it.

This should be replaced.

Do you need instructions or the number of an engineer?

If you do, please contact again, otherwise please rate as Fixya! if this has resolved your problem.

Thank you.

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AL03, DOES NOT DRAIN AT THE END OF CYCLE, DRAINS AT THE BEGINNING


AL03 - HEATING TIME-OUT
The maximum heating time for the water is 45 minutes; if the correct temperature is not reached within this time, an alarm condition is generated.
Possible causes:
  • Heating element broken
  • Safety thermostat open
  • Wiring interrupted / disconnected
  • NTC sensor faulty / incorrectly positioned / poor thermal contact

Dado

Jun 01, 2014 | AEG 18 in. Favorit 64800 Free-standing...

1 Answer

My fdw60 hotpoint dishwasher seems to start then the fast light and the delicate light flash and it stops. Please help.


Have you tried cleaning out the filters in the base of the machine? Also make sure there is no bits in the filter sump. Then give it a clean using a dishwasher cleaner.

Nov 10, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Fault Code AL03 in an FDW80 dishwasher


Al03 stands for problems with the drainage either ur pump is blocked or has just stopped working so not enough pressure to drain out water during cycle

Jan 11, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Al03 flashing on display on hotpoint ultima sdw85


Disconnect the power from the dishwasher completely for at least three minutes, it should reset.
This can happen after a lightning storm.

Sep 28, 2008 | Hotpoint Dishwashers

1 Answer

Miele G 7856 Commercial Dishwasher


Hi. The above machine stops mid cycle and drain/fill light is on, also error code F3E, have cleaned both hot and cold water inlet filters, also checked drain pump and drain line, all ok. Machine drains with no issues and fills with hot water, runs for a while then shuts down.
Any ideas?

Aug 20, 2008 | Miele 24 in. G638 Plus Free-standing...

2 Answers

Hotpoint Ultima dishwasher dwf70


Press and hold the start and the on/off buttons together. It should come out of demo mode.

Aug 25, 2007 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

FDW 60 Float and Filter Clean problem


Blockage in internal pipework causing water not to circulate fast enough to stop switch activating. Regards Advisor

Aug 17, 2007 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

Related Topics:

378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...