Question about Intermatic 7 Day Electronic Timer Eh10 Spst 120v

1 Answer

Intermatic EH10: I can't figure out how to set a schedule of Sun - Thurs, 8am on, 10pm off and Fri & Sat, 8am on, 11pm off. I tried every day of the week 8am on, 10pm off and Fri & Sat 8am on, 11pm off, but the daily settings override the Fri & Sat settings.

Posted by on

1 Answer

Http://waterheatertimer.org/pdf/eh10-manual.pdf

The EH10 is 120V digital timer.
The timer offers the following days:
-All 7 days
-Monday thru Friday
-Saturday and Sunday
-Each individual day
-Blankday (day skipper)

If I understand your schedule:
You want
Program1 ON at 8am Sunday
Program1 OFF at 10pm Sunday
Program2 ON at 8am Monday thru Friday (with blankday on Friday)
program2 OFF at 10pm Monday thru Friday (with blankday on Friday)

Program3 ON at 8am Friday
Program3 OFF at 11pm Friday
Program4 ON at 8am Saturday
Program4 OFF at 11pm Saturday

I filled in the chart for you.
I left off the display.
I do not have this timer and don't know 100% how the display looks without buying the timer.

Intermatic EH10: I can't figure out how to set a - geno_3245_16.jpg

If you need more help on a specific step in the manual, add a comment and I will answer.

Posted on Nov 07, 2010

  • 2 more comments 
  • wdaryl Nov 07, 2010

    There is no "MO-FR (with blankday on FR)" setting. In my original post I noted that the daily settings overrode the FR

  • Anonymous Nov 08, 2010

    I answer questions for free. I don't know what you mean when you say that 'the daily settings override the FR SAT settings' FR SA are not an option on the timer. Naturally, I figured you were having a problem deciding which days to put on your timer schedule. Your followup comment is different and says 'the daily settings override Friday.' Are you having a problem setting blankday? Or does the timer display skip over FR? If you cannot set bankday, I agree the manual is very unclear about how to set blankday. And I don't own the EH10 timer. So if blankday is the issue, I cannot answer that specific question. However maybe my free hour of work helped define your question exactly and now I urge you to re-post the blankday question to a paid answerer at fixya. They give a money-back guarantee.

  • Anonymous Nov 08, 2010

    I send a request for detailed information about Blankday to Intermatic. I don't know if they will send specific information or a generic answer. In any case I will post here as soon as I get a reply from Intermatic.http://www.intermatic.com/customer service/contact.aspx

  • Anonymous Nov 09, 2010

    The Intermatic work-around says to set each individual day M, Tu, W, Th for ON at 8:00 and off at 10:00. They sent the following response: "Actually our original manual is in error. The blank day is actually a way to delete a program only by depressing the DAY button until you see -:-- which is the blank day screen. There is no other purpose for the blank day mentioned in the instructions so you cannot delete the Friday program when programming for the M-F program. You can however just program individual days M, Tu, W, Th and just not program Friday."

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need help to register my samsung referigerator


You can call them at 1-800-SAMSUNG (1-800-726-7864)
Mon - Fri: 8am - Midnight (EST) Sat - Sun: 9am - 11pm (EST). Or follow this link and live chat

Nov 09, 2014 | Samsung Refrigerators

2 Answers

Error message ERR


Product Phone Number Hours Support Website SURFboard® Cable Modems and Gateways 1-877-466-8646 Sun-Sat 7AM-11PM CST Website link Touchstone Cable Modems, Gateways and EMTAs 1-877-682-7747 Sun-Sat 7AM-11PM CST Website link DSL Modems and Gateways 1-877-466-8646 Sun-Sat 7AM-11PM CST Website link Video 1-877-466-8646 Sun-Sat 7AM-11PM CST Website link Software 1-877-466-8646 Mon-Fri 8AM-8PM CST Website link

For other Motorola products, please visit the product's website for your support questions.
Product Phone Number Hours For general product questions and technical support
on your Android-powered Smartphones and Devices
e.g. Motorola XOOM™, DROID RAZR™, DROID Pro,
Motorola ATRIX™ 4G, MOTOACTV™ 1-800-734-5870 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST Motorola Fitness Devices
e.g. MOTOACTV 1-800-734-5870 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST Non-Android Mobile Phones & Accessories
e.g. Motorola Karma™ QA1, MOTORAZR2™ V9,
MOTO™ W233 renew 1-800-331-6456 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST iDEN i-series/ic Series
e.g. i776, i425
(Nextel, Boost Mobile, and Southern Linc) 1-800-453-0920 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST TTY Support 1-888-390-6456 Mon-Fri 8AM-5PM CST
reference: http://arris.force.com/consumers/pkb_Home_ConsumerCallUsPage
Call Us

Mar 20, 2014 | Motorola Televison & Video

1 Answer

Samsung 63 Inch TV 1080p Plasma HDTV line across screen


You have dead pixels , It may cost more to fix than getting a new tv, ill recommend calling samsung and talking to them to see if your still under warranty. Thanks -JC
1-800-SAMSUNG (1-800-726-7864)
Mon - Fri: 8am - Midnight (EST)
Sat - Sun: 9am - 11pm (EST)

Oct 11, 2013 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

I have a timer that won't hold the program time set schedule? I have paid an electrician to come out and check to make sure i don't have any shorted out wires?? Electrician didn't find any...


Question posted under 120volt Intermatic Eh10 timer.
I do not have repairs for defective timer.
EH10 has 1 year limited warranty.

Located just below the digital display is compartment for AA battery.
Display is controlled by battery.
Replace battery, press and hold reset button for several seconds to reset timer, and try to program again.
http://waterheatertimer.org/How-to-wire-EH40-hot-water-heater-timer.html#EH10
http://waterheatertimer.org/pdf/eh10-manual.pdf

EH10 and EH40 timers are susceptible to line noise.
If timer is connected to water heater, there is no line noise. And electrician tested for shorting wires.
But when timer is connected to fan, pump, or other type of load, then interference can be a problem.
Intermatic can provide a filter.
http://www.intermatic.com/customer%20service.aspx

Digital timers, digital water heaters, digital washer and dryer, digital water softener, digital treadmill, etc are increasingly common, yet are not protected from surge.
People protect computers and TVs, but forget other costly items.
EH10 can be affected by surge.
Install whole house surge protection:
http://waterheatertimer.org/Intermatic-trippers-and-parts.html#surge

Aug 17, 2011 | Intermatic 7 Day Electronic Timer Eh10...

1 Answer

Looking for a timer to turn a 120volt 2amp water pump on for 1min 2 times aday that will last for more than 3 years please help


1) You need 120V timer to control 2 amp water pump.
V x A = watts so 120V x 2amp = 240 watt
754 watts per HP divided by 240W = 1/3 HP horsepower.

2) To get 1 minute time periods, you need electronic timer.
Most electronic timers have minimum 1 minute set time.
Same schedule each day, you can use 356-day, 7-day or 24-hour electronic timer.

3) To have electronic timer last longer than 3 years you need a clean circuit and expensive timer.
Use circuit analyzer to check circuit. Hire electrician to check circuit and replace pump if necessary to make sure timer will last as long as possible.

4) Intermatic ET70115C should last for many years. Battery is replaced every 8 years.
http://www.intermatic.com/products/timers/electronic%20time%20switches/next%20generation%20time%20switches.aspx
ET70115C $379
http://www.1000bulbs.com/product/3391/ELEC-ET70115C.html

5) You posted under EH10 water heater timer, which is inexpensive water heater timer rated for 1HP. You can't expect inexpensive timer to last as long when using a motor, although 1/3 HP is lightweight motor.

6) You can buy five EH10's for same price as one ET70115C.

7) List of ordinary electronic timers, each with slightly different features
Intermatic EH10 $73
http://www.amazon.com/Intermatic-EH10-Electronic-Heater-Indoor/dp/B000GHIPOA
Intermatic ET1105C $96
http://www.amazon.com/Intermatic-ET1105C-Hour-Electronic-Switch/dp/B002X1FYWI
Intermatic ET101 $101
http://www.westsidewholesale.com/24-hour-programmable-electronic-timer.html
Tork EW100B $177
http://www.1000bulbs.com/product/8434/TORK-EW101B.html
Sylvania SA300 $72
http://www.amazon.com/Sylvania-SA300-120-Volt-Single-Pole-Industrial/dp/B000KKNEO4

8) See wiring diagrams and manuals for some of the timers listed above:
http://waterheatertimer.org/Boxtype.html

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.

Jan 31, 2011 | Intermatic 7 Day Electronic Timer Eh10...

1 Answer

Pls get me ur customer care number


Hi and welcome to FixYa, I am Kelly. We are not affiliated with Whirpool but... you came to the right place for help.

You can schedule an appointment on line via this webpage:
http://www.whirlpool.com/custserv/index.jsp

Or you can contact then via phone here using this number:

CONTACT WHIRLPOOL
(866) 698-2538
Mon-Fri: 8am - 10pm (EDT)
Sat: 12pm - 5pm (EDT)

Email: http://www.whirlpool.com/custserv/email_form.jsp

Thanks for choosing FixYa,

Kelly

Dec 10, 2010 | Whirlpool Refrigerators

1 Answer

Are the 7 different programs for 7 different days or are they exclusive?


There are 7 ON events and 7 OFF events
http://waterheatertimer.org/pdf/Woods-59028-59018.pdf

When programming the timer, you select individual days or blocks of days.
For example program1 ON time
Set the Hour
Set the minutes
Press the day key to scroll through the possible choices.
Then you set program1 OFF time
Set the hour
Set the minute
And then press the day key to scroll through the possible choices.

The choices are:
Each individual day
Monday thru Friday
Sat-Sun
Monday thru Sat
Monday thru Sun
Monday-WED-FRI
Tues-Thurs-Sat
Mon-Wed
Thurs-Sat

The key is to set the ON and OFF times for the same days or blocks of days
For example program1 ON is 8:00 am Mon thru Friday
Set program1 OFF for 3:00 pm Mon thru Friday

and then program2 ON is 8:30am Sat-Sun
program2 OFF is 5:00pm Sat-Sun

Program 3 ON is 6:00pm Tues-Thurs-Sat
Program3 OFF is 9:00pm Tues-Thurs-Sat

Program4 ON is 6:00pm Sat
Program4 OFF is 11:00pm Sat

Programs5, 6 and 7 might not be needed

The key is to make a chart of times before setting timer.
The chart will prevent conflicts in programming where the timer does not operate as expected.

Nov 08, 2010 | Coleman Cable Woods 59018 InWall 7Day...

1 Answer

I need to buy parts for my bissel


Parts can be purchased at www.bissell.com or by calling BISSELL Consumer Services at.....
1-800-237-7691
Mon-Fri: 8am to 10pm ET
Sat: 9am to 8pm ET

Sep 28, 2010 | Bissell 3750 Lift Off Bagless Upright...

1 Answer

I wanted to get the contact numbe of whirlpool service station in vadodara


CONTACT WHIRLPOOL directly for the nearest authorized service center
(866) 698-2538
Mon-Fri: 8am - 10pm (EDT)
Sat: 8:30am - 8pm (EDT)

Jul 31, 2010 | Whirlpool Ovens

Not finding what you are looking for?
Intermatic 7 Day Electronic Timer Eh10 Spst 120v Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intermatic Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5089 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Steve

Level 3 Expert

3287 Answers

Are you an Intermatic Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...