How to Connect my Cyberhome CH-DVD 300 from my TV that has SCART interface to Component Out on the DVD player
I need help to try and connect my TV which has a SCART interface to the DVD player using the Component Out option. I bought the SCART to YUV cable and it does not work. When I go to the Settings option on the DVD player to change to YCbCr or YPbPr, the TV screen goes blank. Then I have to reset the DVD player to factory settings. REading the manual, it suggest that I should not set the DVD player to from Scan to Interlaced, but I do not get that option. Any help would be appreciated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, here is a sample for auxilary connection for the chdvd300:
. Use the AV (Audio/Video) cable
provided to connect the DVD player to
your TV as shown in the diagram.
. Your TV must be equipped with AV
inputs like those pictured to the right in
order to connect this unit.
. If your TV does not have AV inputs, you
will need a RF Modulator to connect this
player to your TV's antenna/cable input.
RF Modulators are available at major
Connect the DVD Player to
CH-DVD 300 Quick Setup Guide
. The goal is to see the DVD player's splash screen on your
TV. To do this, select the Video Input channel on your TV
that corresponds with the input the player is plugged into.
This procedure differs among TVs, but is normally done by
pressing the VIDEO IN or INPUT button on the TV's remote
control to select the Video Input.
. When the DVD player's splash screen appears on your TV,
you're ready to go!
4 Select the VIDEO INPUT on your TV
COMPONENT VIDEO OUT
ANTENNA / CABLE IN
VIDEO R - AUDIO - L
. Plug the DVD player's electrical
plug into a wall socket or power
2 Plug-in the Power Cord
3 Turn on the DVD Player and your TV
. Press the POWER BUTTON on the front panel to turn the
DVD player on. The POWER LED should now change
from RED (STANDBY MODE) to GREEN (ON).
You can find an quick install wiring schematic at retrevo.com, just type your model number in the search window.