Question about Washing Machines

2 Answers

Beko 1510S washing machine stalls at spin

Any of the washes we put the machine onto, it gets to the main spin point and then stalls, leaving the washing soaking. It does drain the water, but then it just doesn't do anyrthing after. All you can hear is a whirring and clicking noise repeatedly. The only way we can fix this is to turn it off, move the dial to a spin option and then turn it back on again. But then this is a smaller spin, so the clothes aren't spun properly and come out with some of the detergent on it in places.

Anyone know how this might be fixed and whether it would just be more economical to get a new one instead?

Posted by on

  • miccahotpant Jun 16, 2008

    No it's not. To be honest, I don't think we've ever used that button. :D

×

2 Answers

Afraid it sounds like the gearing in the programmer is faulty. My opinion of beko machines would be pretty low to say the least and my honest advice would be if it's not still under it's warrenty to bin it and buy a decent one.

Posted on Jun 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check to make sure you have't got the rinse hold button pressed in. If it is your machine will stop at the end of it's rinse cycle and will not go into its final spin.

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beko washing machine stuck on rinse cycle water I drum but wont move onto spin


all you need to fix your beko

pump fault




or spin problem



i hope this helps
Buy Paul Beer

Jan 11, 2014 | Beko Washing Machines

1 Answer

Hi, my Beko washing machine, WMA 1512 W stops half way through wash cycle and leaves conditioner in drawer, won't rinse and I have to manually turn dial to spin, any ideas please?


Beko washing machine, WMA 1512 W stops half way through wash cycle and leaves conditioner in drawer This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Jan 26, 2013 | Beko Washing Machines

1 Answer

I have a beko 1510s washer drum not spinning at all


the noise is possibly the bearings, if these are loose the tension on the belt will not be kept, no tension the belt will fall off. you have to check the bearings, empty the drum of clothes and lift the rim of the drum you should feel a loosness before the tub moves. Drum is the stainless steel bit Tub is the plastic but the drum sits in. if this (as I suspect) very loose your bearings are gone, alternativeley if not it could be the belt tension thats too loose, you might have some adjustment on the motor bracket for this or a new belt. but if the bearinings its cheaper to replace the machine than the bearings due to labour costs. insurance may cover it?

Sep 30, 2009 | Washing Machines

1 Answer

Beko wma1510s washing machine dial problem


my beko wma 1510s will not spin and is heating up

Apr 11, 2009 | Washing Machines

4 Answers

Beko wma 642 w washing machine not spinning


disconnect from plug socket for an hour at least then try. this resets something apparently

Oct 21, 2008 | Washing Machines

1 Answer

I have a Beko washer WMA 1613S and recently the programme dial is skipping through the set wash functions without performing all the relevant actions in the cycle. This seems to occur on all number...


I have a Beko washer WMA 1510S and recently the programme dial is skipping through the set wash functions without performing all the relevant actions in the cycle. This seems to occur on all number settings.

Andrea

Aug 30, 2008 | Washing Machines

1 Answer

Beko 1510w or wma 1510s wasting machine


it is quire a difficult job to do and don't recommend if you have no experience
sorry!

Jul 18, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...