Question about Audio Players & Recorders

Open Question

Kenwood RXD24M CD won't play...seems to have power to it. Drawer takes CD in but doesn't start playing.

Posted by on

  • Anonymous Nov 12, 2008

    same with mine

×

5 Suggested Answers

  • 238 Answers

SOURCE: CD drawer won't open

hi, try opening up the cover lid, and manually give a mild push to the tray, must be some small jam, or the eject belt or gear,.let me know

Posted on Dec 30, 2007

robotek
  • 1512 Answers

SOURCE: I have a marantz cd

Hi dr dray
Your player has a CDM12.1 laser transport fitted to it. They suffer a couple of problems that can be fixed that stop em from working so well. If you are handy with a screwdriver, then I can talk you through it.

regards
Robotek

Posted on Apr 28, 2008

  • 5 Answers

SOURCE: Kenwood KVT-617DVD sound issues

the wireing off the brain is connected wrong, ok look at the wires and now disconnect your remote wire from the amp remote now connect the second blue wire to the remote wire going to the amp, now your sound should be right

Posted on Jun 14, 2008

  • 31 Answers

SOURCE: CD drawer will not open or close

Hi, The CD drawer mechanism needs a new belt. They have a motor that drives the tray mechanism, and there's a small belt that drives the main gear so that pushing the drawer in gently to close it doesn't damage anything. However, once that belt breaks/wears out, the drawer will stay in whatever position it was last in.

Posted on Sep 17, 2008

  • 136 Answers

SOURCE: A CD is stuck, it won't play, and it won't eject.

i would go to the website of the make of the 5 disk changer and click on the support page. there you should find answers to your problem

Posted on Apr 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitachi ax-m71 cd door won't stay closed. Unable


if it opens back up when you close it the drawer mechanism is probably out of alignment. Most players have a slot on the bottom of the drawer that a pin must slide in. Look under the drawer and see if there is a pin sticking up that maybe should be in that slot.

Jul 09, 2013 | Audio Players & Recorders

1 Answer

Bose wave radio cd won't play cd's


If your CD is not scratched,the optical lens need replacement.

Apr 02, 2013 | Bose Awrc1g Wave Radio Cd Player Only -...

1 Answer

I have kenwood mp245 and the protect word is displayed what can I do to get the radio to play


Make certain all speakers are good the cables are not damaged and there are no bad connections causing a short.
If that doesn't clear it you may have a shorted part, such as a transistor in the amp section.

Jun 30, 2012 | Kenwood KDC-MP245 - CD/MP3 Receiver

1 Answer

How to connect a kenwood ka- 9100 to a pioneer vsx-d608


You don't say, what role the Kenwood is supposed to play but I'll assume you want to slave the Kenwood (and its speakers) to the Pioneer.

The VSX-D608 doesn't have multi-channel pre-outs so you wouldn't have local control of the volume at the Pioneer.

http://www.auctiva.com/hostedimages/showimage.aspx?gid=108365&ppid=1122&image=404270323&images=404269872,404269931,404269984,404270049,404270137,404270323&formats=0,0,0,0,0,0&format=0

The KA could be a subwoofer amp as the Pioneer has a pre-out for that.

Outs to Ins. "Power In" on the KA would be for an external volume-controlled source. Otherwise, use one of its non-Phono inputs.

http://tubehacker.com/sale_item.php?item_id=31

May 29, 2011 | Kenwood Audio Players & Recorders

1 Answer

Kenwood KR-A4070 blowing 5a 125v fuses


I am guessing that the ceramic resistor is close to the output transistors. I would also guess that one or more of the output transistors has shorted. This causes a high current draw that is blowing the fuse. You could also have a power supply problem. The ceramic resistor is a .22ohm dual emitter resistor that is used in the output stage. The transistors located close by are probably shorted and should be replaced. Start there and let us know what happens once the transistors and the resistor are changed.

Dan

Oct 10, 2008 | Kenwood Audio Players & Recorders

1 Answer

Have Kenwood CD UD-405 not used for many years. Will not now play CDs or sometimes a few tracks then cuts out stating *NO DISC". Seems fine electronically. Tried switched on for several days to remove...


Seemed to have solved problem by using lens cleaning disc. Had no effect at first but kept trying it and eventually started working. Many cut outs but kept repeating and eventually played without cut outs.

Sep 08, 2008 | Audio Players & Recorders

1 Answer

Hi. Own A Kenwood RXD 653 midi hi fi that's around 8 years old.The problem is it has,mainly,stopped playing cds.Its a 3 disc changer and when i try to play any cds I can hear the disc spinning but the...


It is the laser, If the cd mech is in the top of this one you may just need to clean the lens manually. Cleaning discs are not all that reliable. You can do this by taking the top off and looking at the area where the disc gets clamped to play. The laser has the small glass lens. That is the part you need to clean. Take a Q-tip and wet it very lightly with some windex or some alcohol. Make it so that the Q-tip is just barely wet. Then just lightly rub the lens without pushing on it hard at all. Just nice and easy over the glass lens. Then dyr it off with the dry end just like you did with the wet end. That's it. close it back up again and turn it on and see if it plays. If it still does not play you need a new laser. No other fix for it.

Jul 03, 2008 | Kenwood Audio Players & Recorders

1 Answer

I have a marantz cd 67 se cd player.it doesn't always play cd's.it appears that it fails to recognise there is a cd in the cd drawer. also when it does actually play it often stops playing part way through...


Hi dr dray
Your player has a CDM12.1 laser transport fitted to it. They suffer a couple of problems that can be fixed that stop em from working so well. If you are handy with a screwdriver, then I can talk you through it.

regards
Robotek

Apr 27, 2008 | Audio Players & Recorders

1 Answer

Kenwood kdc-w4031 problems


How do I play dvd or vhs on my tv?

Mar 30, 2008 | Audio Players & Recorders

1 Answer

Kenwood RXD25 CD player intermitent??


Hi jenoss

Sounds like the unit has either a failing load belt to the cd drawer mechanism,not allowing the transport to fully load the cd. Give the unit a gentle tap just after the drawer closes and see if it resolves the problem.

OR a faulty spindle motor, you will have to take the lid off and after pressing play, give the disc a gentle "kickstart". If it then begins to run, then the motor is the problem.

If you find it is neither of these, get back to me here and I we shall go further

regards
Graeme

Mar 16, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100174 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

70983 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...