Question about E-Machines EMA IMPERIAL GV (845GV) TG3 eMachines (145119) Motherboard

1 Answer

EMachine laptop/windows xp problem

Hi there!

i'm having a problem with my eMachine laptop. it froze on me so i shut it down. upon restarting a page came up telling me:

"we apologize for the inconvenience but Windows did not start successfully. A recent hardware or software change might have caused this." etc. etc. etc.

it then offers me the possibility to start up with:

safe mode
safe mode with networking
safe mode with command prompt
last known good configuration
start windows normally

i've tried each of these options but it just loops me back to this first page (it acts like it's trying to start up... a page comes up with the microsoft windows xp logo, then the monitor goes black then a quick flash of blue... next comes up an emachine logo saying to press delete if i want to change system settings... and then if i don't do anything it loops back to the first page i've already described).

???

any advice? i GREATLY appreciate any advice you can offer...

:)


Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

Ur window had been crashed pls install new window

Posted on Jun 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Asus p5vdc-x will not boot up


Press F8 during boot and go into Safe Mode. The roll back with System Restore. It is located in Start > Programs > Accessories. Or a link in help under tools.

You may have to try a few dates. This should help, if not repost with erros or more details. gl

Dec 27, 2012 | ASUS P5VDC-X Motherboard

1 Answer

Hello, My computer is a dell labtop with windows XP. It will not allow me to plug in my usb for my camera or my new vivitar digital key chain usb to upload pictures. As soon as I plug the usb into the...


try connecting to a different usb port and if still that happens ...remove the motherboard drivers and restart the system and than plug in the camera if it doesnt restart install the drivers again from the dell support website ... support.dell.com u have to put in ur service tag and than down load the drivers required and see if the issue is resolved or not if not than u have to reinstall windows

Dec 24, 2010 | Computers & Internet

1 Answer

WINDOWS NOT SHUTTING DOWN COMPLETELY


Hi,
You will need to enable the Advance power management in Bios and on windows..
Try to see in the bios the advance setting for APM.
Some motherboard you have to enable this.
Other its simply on windows.
After the installation of windows
Go >Right click desktop>properties>then select screen saver tab>below click power>
Then click APM tab
enable and restart
May be this can solve this issues.
Or else I would advice to change the power supply and see.
Regards
uttam

Feb 03, 2010 | Computers & Internet

1 Answer

Hi When I try shut down the pc Windows XP will close leaving the power supply, cpu,fans, usb still running To shut down the pC I have to turn off the power switch at the rear Please help


This issue also cause by a hard drive errors, check your hard drive for errors. In My Computer window, right click Local Disk C select Properties, go to Tools tab, click Check Now button, put check on Automatically Fix Errors and Recovery of Bad Sectors, then restart your computer to run the check disk operation.

Also read this solutions regarding about Windows XP Shutdown and Restart Troubleshooting

http://www.aumha.org/win5/a/shtdwnxp.php

Jan 26, 2010 | Abit IT7-MAX2 Motherboard

1 Answer

Computer not started properly


the window is corrupt try to repair the window with window xp

May 30, 2008 | Intel D845GVSR Motherboard

1 Answer

Vista install


insert the vista disk and shut down the computer
restart the computer and hit the f10 key repeditivly this will bring you into bios, choose boot order and choose to boot from cd rom
follow the instructions from there.

May 11, 2008 | E-Machines EMA IMPERIAL GV (845GV) TG3...

1 Answer

Wont power down after shutdown


your operating system is screwed up,backup your files and reinstall with the restore disk/repair ,good luck

Nov 26, 2007 | E-Machines EMA IMPERIAL GV (845GV) TG3...

1 Answer

Alarms


Hello, find the BIOS Beep Codes at http://www.amptron.com/html/bios.beepcodes.html and try to find your problem. It is not a software or Monitor problem. It could be RAM or Video Card failure

Aug 04, 2007 | Biostar M7VIZ Motherboard

1 Answer

Can not save to bios


windows and the bios needs to know that the operating system can be shut down through windows, so when you go into the F2 or Del on boot up, go into advanced cmos setings and look for ACPI and make sure it is enabled. This sets the motherboard to support shutdown. Save and exit settings and reboot. Now go to control panel>performance and maintanance>power options and set the correct instruction for shutdown to shut the pc down. Remember evertime you remove the cmos battery or reset with jumpers you have to reset date and time and anything else you have changed to suit your set up

May 06, 2007 | Abit KN8 SLi Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...