Question about Veo Observer Network Camera

2 Answers

VeoNetwork Web cam

I can access the cam from home and the cam is at home. So i want to know to access it from other machines in remote places. Be specific please, i don't understand very much technical IT terms.

Thanks,
Luis

Posted by on

  • pgyuf Oct 10, 2008

    Hi,

    I have Veo Observer. I able to view pictures in LAN, but its a message in remote. The note: VeoNetCam ActiveX Control
    v2.071 download failed!!
    I swiched off all activeX blocks. IE7, firewalls swiched off.

    Help! What can I do?


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

You can view your Veo Observer web cam at home by either of two methods. The first is to use the Observer Studio software that came with the camera. When you configured the camera, you selected a local (private) IP address for each Veo Observer, and set the address specific to each camera. You then put the same IP address into your Observer Studio Software.

Depending on the brand of router you use on your home network, your Veo Observer camera probably has a local (private) IP address in the format 192.168.0.xxx or 192.168.1.xxx where "xxx" is the actual address assigned to your Veo Observer (by you) and configured to display on the LCD window on the side of the Veo Observer.

You may need to log into your router to see which of the two local (private) IP address formats is used. Your router's user manual will show you how.

To view your Veo Observer, just type the exact local (private) IP address in your IE browser. for example, if you assigned address 100 to your cam, you would enter http://192.168.0.100 or 192.168.1.100 into your browser. Veo Observer will display the Language selection screen. Choose the language, then you log in and view your camera.

To view your camera from outside your home using another computer, you use the same method, but you have to substitute your WAN (public) IP address.

You can log into your router and select its STATUS tab to view your WAN (public) IP address. See you router's set up guide if you do not know how to do this.

An easier way to determine your WAN (public) IP address is to visit Gibson Research Shields Up! web page:

https://www.grc.com/x/ne.dll?bh0bkyd2

and scroll down to the last paragraph where you will find your WAN (public) IP address.

For example, if this address is 123.456.789.100, then you would enter http://123.456.789.100 on your IE browser. You should see the Language select screen, choose your language, then log in and you are now viewing your Veo Observer from outside your home.

Note: when you view your Veo Observer at home, you probably have a fast frame rate and smooth video motion. When you view your Veo Observer from outside the home, the frame rate is certain to be less, and your moving image quality will be choppy. This is normal, as viewing from outside the home is less efficient and the image suffers. There is nothing you can do to boost the frame rate.

Posted on Aug 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Veo Master
  • 10,322 Answers

1st You download Webcam Driver.
Web cam After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Veo Camera Drivers for Windows XP Vista Windows 7

Posted on Feb 24, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i install my webcam driver i lost my driver of windows vista now im windows 7 home basic


It depends on the manufacturer and model-identifier of the webcam?

For example, if you have a HP web-cam, access http://support.hp.com
and do a search, after entering the model-number.
Select the downloadable device-drivers for Windows Vista.

Or, do something similar for a Logitech web-cam -- by accessing Logitech's web-site.

Feb 01, 2011 | HP Computers & Internet

1 Answer

My Integrated Web Cam Says that I need to Turn the Web cam on! only problem..... i dont know how to


goto control panel...goto search function line.. type in web cam... follow instructions or Goto HP web site, they will walk you through it or do it by remote control

Nov 25, 2010 | HP Pavilion dv6000z Notebook

1 Answer

The operating systems is windows vista home premium.


You can get drivers, manuals, etc. here: just look at the notebook directory.
http://support.acer-euro.com/drivers/ftp/ftp.html

Mar 04, 2010 | Acer Aspire 9410 Notebook

3 Answers

Windows home server remote access - cant get it to work


It's probably not about RDP. I think we are talking about the homeserver remote access that allows you to up/download stuff to/from yourshares, run the server console or remote control a workstation in your homenetwork from outside (from the internet).

The whole procedure is a little complex. In short, you have to:
- start remote access in the WHS console (settings - remote access)
- create and configure a dyndns domain name (or something similar) to find your server from outside
- configure the user profiles to allow remote access. They need to have "strong" passwords.
- forward the port numbers 80, 443 and 4125 to the servers IP address on your internet router.
- forward the port 3389 too, in case you want to use the RDP protocol to access the servers remote desktop.

That should be it.
If you have several routers in your net, you have to forward the ports from the first one to the second and from there to the home server.

Since we don't know where exactly you are stuck, you should post a little more information.

Hope this helps.

Nov 06, 2009 | Computers & Internet

1 Answer

How do I access my webcam to take pictures and that sort of thing on my new hp laptop?


  1. Ensure the web cam is secured to your personal computer (PC). Most web cams use a "plug and play" principle. You plug the web cam in; it operates.
  2. Install the required software for the web cam to operate. This may involve placing a CD in one of the drives, or alternatively, downloading the software from a host site.
  3. Always reboot the computer after installing new software.
  4. Click on the desktop icon or the program icon to start the program. If the program is correctly functioning, the web cam will start producing an image of its view on the desktop. Adjust the web cam for a clear picture and the view you want.
  5. Most web programs will have a icon for "take picture." Left click on that icon or button. The web cam, like a normal camera, will then "freeze" that image and place it in a photo library.
  6. Open the photo library and examine the image just taken. Congratulations, you just took a photograph with your web cam.
Thanks for using Fixya..

Sep 10, 2009 | Computers & Internet

1 Answer

Don't know how to access webcam


how do you acsess your web cam were do you click

Mar 17, 2009 | E-Machines M5305 Notebook

1 Answer

D-Link DI 524 behind VNC access remotely - Need help....


Open a browser and type in htp://192.168.0.1 to access your router's web management interface. Enter the username and password (default is username admin and no password)
Go to the Advanced Tab and Virtual Server
Name=VNC
Private IP=IP Address of your Home notebook
Protocol Type=TCP
Private Port=5800
Public Port=5800
Set Schedule as you like
Enable the rule and click Apply.

To access you Home notebook from anywhere other than your house, go to http://10.0.57.46:5800

Next - remote management of the router.
The IP address that you enter on the remote management page is the IP address that is allowed to connect to the remote management. If the 194.145.183.83 is the IP address of your office, this should work. Be sure you apply a password or anyone going to http://10.0.57.46 will have access to you router, I also recommend changing the port from 80 to 8080 so that http://10.0.57.46:8080 has to be typed to access the remote management interface.

Jan 02, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Web cam / sling box


Salutations Stearns,

As I am sure you are aware, the Slingbox is designed to allow you to watch any video source remotely from any computer with an internet connection.

A web-cam would be slightly different, normally web-cams do not have video output, they normally have a USB or Fire-wire connection. There are some software packages and web-cams that allow for remote activation and viewing. These units and programs should be able to be found under "Home Automation" or "Home Monitoring"

Hope this helps.
Jon
Go Ahead. Use Us.

Jun 24, 2008 | Televison & Video

1 Answer

Web cam


Hi,

Yes, Webcam Watchdog can be used as a web server enabling you to access your files remotely.

If you set the path of your video files under HTML document folder, you can access your video files from your browser.

For example, if your HTML document path is c:\webcam and the path of your video files is c:\webcam\video, you can access your video files from your browser.

Simply enter http://your_ip/video in the browser and you will see your video files. You can also set password to control the access to your video files. 

The trial version can be downloaded ffrom here :

http://www.webcamsoft.com/en/trial.html

You can get the manual from here :

http://www.webcamsoft.com/en/trial.html

Second Issue :

Need some details.

OS - vista or XP.

Use the updated from the manufacturer' site of your webcamera.

If you have mentioned the model & manufacturer

I couold have pasted the links to download & the instructions.

Good Luck.

Live, Love, Laugh.

May 11, 2008 | Computers & Internet

Not finding what you are looking for?
Veo Observer Network Camera Logo

1,783 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Barbat Nae
Barbat Nae

Level 3 Expert

508 Answers

Are you a Veo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...