Question about Creative Labs FourPointSurround FPS1800 Computer Speakers

4 Answers

I have a creative 4.1 Speaker system but only Front speaker seems working???????????????

Posted by on

  • 1 more comment 
  • Anonymous Oct 04, 2008

    I have a creative 4.1 Speaker system but only Front speaker seems
    working??????????????? problem, and notify you when a new solution is
    offered. wellla@hotmail.com

  • sibi123 Dec 22, 2008

    i have an inspire 4.1 model . it seems to be that only front two speakers and sub woofer is working when connected to pc

  • sanjay ji Feb 10, 2009

    I have using creative 4-1, problem --> sound is not coming but, all things are ok, plz decribe about software discription only

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have 4.1 creative speaker but only front 2 speaker will work

so i have connected convertor ie,2 output and 1 input then i connected to the green port so all the speaker are working.

Gowrish

Posted on Feb 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Use a splitter which is available for Rs.15

Posted on Jul 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have 4.1 speakers of creative from that i can play only two speakers in vista 32 ultimate i want to play four speakers at a time.plz answer.

Posted on Oct 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 508 Answers

What is your soun card brand? it is a 5.0 sound card?

Posted on Jun 23, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: less center speaker sound

i give two solutions

1. Buy Amplifier.

2. Buy stereo converter.

Posted on May 10, 2009

nicklemarr
  • 296 Answers

SOURCE: Hai, i have recently purchased

All color code wires are in appropriately? If so, right click the speaker in the notifications tray, and click on playback devices. Fine your motherboard out. Right click it and configure it to output in 5.1
If that doesn't fix your problem then you have a hardware problem with the speakers.

Posted on Mar 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2.1 creative speaker but one speaker cant't working


if you have a spare jack port in the front of your casing try to insert the speaker jack on it. thanks

Sep 15, 2011 | Creative Labs SBS 370 Computer Speakers

1 Answer

Hai, i have recently purchased creative inspire t6100 5.1 speaker system (My PC Operating system is Windows 7 and audio driver is realtek HDD 2.57 version). All speakers are working except front right...


All color code wires are in appropriately? If so, right click the speaker in the notifications tray, and click on playback devices. Fine your motherboard out. Right click it and configure it to output in 5.1
If that doesn't fix your problem then you have a hardware problem with the speakers.

Mar 24, 2011 | Creative Labs Inspire T6100 Computer...

4 Answers

I cannot seem to get the driver working on my new computer which has windows 7 currently. Are the two compatible?


Are we looking at this same computers? Since when do you require drivers for speakers?!? Speakers are dumb devices (yes, this is correct name for passive computer devices) and do not require any drivers in any computer or operating system with sound capability! Computer speakers are compatible with any copmuter in the world and any operating system which generate sound!

These speakers are qualified as 5.1, that meant that these speakers will have front bass, front centre speaker, front left and right speaker and rear left and right speaker, in total six speakers.

Please follow this advice and you will have joy of surround sound.

1. Mount your subwoofer in front centre, below your knee level at the distance of about 2 of your hights
2. Mount your centre speaker in the centre on your head/hight level or slightly above at same distance as subwoofer or slightly closer.
3. Mount left front speaker about 45degree from your centre line to the left and right same distance to your right, on the level of your head while you are listening to the music, distance from you slightly closer (about 1/2 your hight) than your centre speaker.
4. Mount your rear left and right speakers at same or slightly greater distance as front left and right speaker. these should be at same or slightly higher level as front speakers.
5. Triple 3.5mm jack is going to your computer output and your speakers (incidently, your subwoofer servers as junction box, amplifier and mixer).
6. Connect speakers to they respective jacks.
7. Turn power on speakers all way down
8. Connect power to the speakers and switch it on
9. Play some music on your computer, output on full, music recommended will be some classic, like bach or similar
10. Put your hand in front of subwoofer and turn bass till you feel vibration
11. Turn sound till you hear it well
12. Turn sound on the computer down till about 70% - 80%
13. Turn on sound on your speakers till desired level and enjoy the experience!

If you have still some problems, these can be then related to the drivers installed on your computer, please check therefore what motherboard do you have, if there is proper sound drivers installed. If not, go to the site of our motherboard/sound card manufacturer and install relevant drivers.

Please do not hesitate to ask me if you have any addtional problem related to this particular issue.

Aug 06, 2010 | Creative Labs Inspire T5400 Computer...

1 Answer

Have an I-TRIGUE 3600 2.1 speaker for my


re-install drivers 4 audio or change settings

Jul 16, 2010 | Creative Labs Inspire T3000 Computer...

1 Answer

Creative Inspire 5200 system won't work


Hi. Check your speaker system with a different audio device like iPod or any MP3 Player using the same jacks. If the speaker system gives out sounds then nothing is wrong with it... if no sounds come out, then you know what I mean...

Try to replace the speaker of your sub-woofer... maybe that can fix it!

^_^

Jun 06, 2010 | Creative Labs Inspire 5200 Computer...

1 Answer

Front right speaker is not working


This may sound obvious, but have you plugged in all the plugs?a 4-channel sound system has two plugs that plug into the sound card.One is for the front speakers and part of the subwoofer, the other is the rear speakers and the other part of the subwoofer. AC97 audio normally supports only 2-channel.s your sound on-board?how many sockets does it have.A common AC97 normally has a green plug (for 2.1 speakers), a blue one for line in and a red one for a mic.A four-channel one will have a black socket for the other two speakers.and 5.1 has a yellow socket for the 5th speaker and woofer.
If your AC97 audio does not have the black socket, then you will need to buy a special card, like the Sound blaster 4.1 Digital (around £20-30).Or, if you want a 5.1 card, the Creative Audigy is considered the best, as the Audigy 2 is still expensive, and there are cheaper cards for 4.1.
Hopefully this should sort out the problem.I also have Creative Inspire M4500 4.1 speakers, and they have 2 plugs.

Jul 07, 2009 | Creative Labs Inspire 4400 Computer...

2 Answers

No sound from rear speakers Creative t6100


Try this:

Go to Control Panel >> Sounds and Audio Devices. Click on Advanced button under Speaker Settings and for Speaker Setup select 5.1 surround sound speakers from the options. Click Apply >> Ok and then check.

Mar 29, 2009 | Creative Labs Inspire T6100 Computer...

1 Answer

Front Right Signal to Front Left Speaker


It is a problem with mixing sound, DX9, or CMSS for 6.0 speakers, try reseting the creative diag. or change the PCI card on another slot.
1) verify connectors.

Jun 15, 2008 | Logitech Z-560 Computer Speakers

1 Answer

A mess!


pls check your audio cable conection. bye

Sep 11, 2007 | Creative Labs Gigaworks S750 Computer...

Not finding what you are looking for?
Creative Labs FourPointSurround FPS1800 Computer Speakers Logo

Related Topics:

1,449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Computer Speakers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you a Creative Labs Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...