Question about Samsung DLP HL-P5663W 56" TV

1 Answer

STANDBY LIGHT TURN ON

I have a slim DLP TV, standby light, timer light, and lamp light turn on and continue to blink but tv won't turn on.

Posted by on

  • William Norred Jun 15, 2008

    I too have this problem, but mine still has the original bulb (about 1 year old). Grey, transparent bar extends vertically down extreme left side of screen, and is about 2 inches wide. Only visible when TV is in 16:9 mode with HD channels.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 375 Answers

When turning on the set will go three startup cycles about 2-3 min. then all three leds will blink/ possible causes /lamp/ballast/dmd board check or purchase the dmd board last (costs) also listen for arcing from the ballest at startup and fan noise if you can and color wheel noise also.if you hear the ballast arcing and trying to fire the lamp look at the lamp.

Posted on Jul 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello I have a Samsung TV Model# HL50A650C1FXZA I have 3 lights blinking 2 green and 1 red light what is the problem


Hello, I try to help. But your questions not spesific.
Below are conditions lamp indicators that appear blinking and solutions:

1. If Timer and Lamp blinking --> Auto timer on/off was been set, picture will appear ~ 25 second.
2. If Timer and Standby/Temp blinking --> A cooling fan inside the set is not operating properly.
3. If Lamp and Standby/Temp blinking --> The lamp cover on the rear of the set is not installed properly.

I hope that solve your problem.
Thanks.

Feb 22, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo...


Hi,

The Standby/Power light of the TV blinks when there is any internal malfunction in the TV. The self-diagnostic function of the TV will cause the STANDBY light to blink or flash when the television detects an issue. The number of times the STANDBY light flashes corresponds to a specific issue.

Few examples are given below; some of the issues may be resolved without the need for service.
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.

If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.

If the issue continues to occur, service may be required.


Thanks for using Fixya.

Feb 04, 2011 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

My samsung 5067w dlp tv does not turn on, the timer, lamp and temp/standby lights keep blinking. Please help!! Thanks


First check the color to see if its spinning or not. Replace it if neccessary. If that's ok, replace lamp and ballast.

Dec 23, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Replaced lamp still not working. no picture no sound. standby,timer and lamp lights blinking. what's your advice?


Two possibilities, make sure lamp cover is fixed properly in its position and screws are tight or ballast supply need to be replaced.
Hope this info will help you.

Nov 21, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

I own a Samsung HL-R5067W 50'' DLP. Set is about 3 years old. Recently I heard a loud pop while viewing, picture distorted, but never went blank. I turned set off. When turned on again a loud whining noise...


Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.

Sep 20, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Live Chat Session


i have 3 lights blinking on my samsung dlp...the lamp light flashes a few times then timer and standby/temp flash....can any1 help

Jan 01, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

The problem is when i turn on the tv it automatically missing


Usually when there is no lamp lit, there is an indication on the front with the timer/standby lights blinking or on. Are there any indications at all?

Thanks,
Dan

Dec 04, 2008 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung DLP HL-P5663W 56" TV Logo

Related Topics:

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69708 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...