Question about Computers & Internet
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The Garmin C340 comes preloaded with maps while the I3 require that the maps be installed onto a micro sd card.
You can place the micro SD card into a SD adapter and use a regular card reader to download your maps. When the software ask for 'Device' to download to use the drop down arrow and find your drive letter associated with the card reader. Using a card reader will be much faster since the it is ubs 2.0 vs ubs 1.1
You could also go to Garmin website and download and install the USB drivers, see link below.
Posted on Jan 30, 2008
haveing a hard time trying to download any updates. I dont have the disk eather for my unit. I have the streetpiolt 2720
Posted on Nov 13, 2008
Have you check the video card, is it loose, not sitting right, beeps are either memory, video or a bad mobo.
here's a list of beep codes; the numbers represent the amount of beeps
1 The memory refresh circuitry has failed 2 Parity errors have been detected in the first 64 KB of memory 3 A failure has occurred within the first 64 KB or memory 4 System Timer failure: Timer 1 on the mainboard does not work properly 5 The CPU has generated an undetectable error 6 8042 Gate-A20 failure: BIOS cannot switch the CPU into protected mode 7 The CPU has generated an exception error 8 The video adapter is missing, or the memory on the adapter has generated a failure 9 The ROM checksum value does not match the value in BIOS 10 The shutdown register for CMOS interrupt channel 2 has failed POST; the system board cannot retrieve CMOS contents during POST 11 Level-2 cache memory has failed the tests, and has been disabled 2 short POST has failed, caused by a failure of one of the hardware tests 1 long, 2 short Failure in video system: a checksum error was encountered in video BIOS ROM, or a horizontal retrace failure has been encountered 1 long, 3 short Failure in video system: the video DAC, the monitor detection procedure or the video RAM has failed 1 long POST procedures have passed
Posted on Feb 21, 2009
There is a small switch at the base that needs to be moved to the "Unlocked" position. It's at the side of the card.
Posted on Mar 26, 2009
Tips for a great answer:
Dec 18, 2016 | Stihl Garden
Dec 02, 2013 | AST Bravo MS PC Desktop
Jan 22, 2013 | Computers & Internet
May 08, 2010 | Washing Machines
Nov 09, 2009 | Garmin Boating
Apr 15, 2009 | Computers & Internet
47 people viewed this question
Usually answered in minutes!