Question about Executone IDS 84500 Phone

Open Question

LOOKING FOR A MANUAL FOR THE EXECUTONE MODEL 32

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: template showing what the keys represent is missing

all of the keys can be programmed with different key codes.
best thing you can do is press each one and see what it does. if you can get into programming of the phone system, then go to A screen and then that EXT, and K for Keys and you will see what is programmed on each key. You will see many codes, but if you put the cursor on each key you will see the description of each key abve key 2 and 3.
i hope this helps.

Posted on Dec 07, 2008

Ad
  • 10 Answers

SOURCE: Model 1B

you will need to have access to the phone system programming. you can do this through a laptop or through Operators programming if you have one there.
Once you are connected you will access A screen, then the EXT you need to program and then K for Keys. there is where you set up all of the programming on each key.
if you need more info, somehow contact me and I can help over the phone. Every system has a remote access through a modem that is built in on EVCM.card.

Posted on Dec 07, 2008

  • 5 Answers

SOURCE: How do I program the Executone model 64 LCD to

I assume you mean change the time and date and that depends on which system model you have....assuming you have an "IDS"...go to the receptionists phone ( the phone you reach by dialing 0 or 3001/ 301 ) and without lifting the handset dial 28 followed by the time in military format...if it worked you'll hear a few quick beeps after inputting the time. You might have an Executone Medley...if so > http://www.mainresource.com/PDFs/TipsMedleySysAdmin.pdf

If you have an older version of IDS you need to program it via a programming terminal or laptop. Leave your email here if you get this and I'll email you - can do it remotely via built in modem.

Posted on Aug 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an executone model 36750-1, cannot find user guide. I would like to know how to use intercom for a single room?


how old is it
i cant find its user guide online either
is the company still in the business of selling phones ?
maybe the model is discontinued or no longer supported by them

all I saw was two used ones for sale online today


1328391-gvbdhzrta0vksrs4gnzywznx-2-0.jpg

Mar 26, 2017 | Executone Lands Phones

1 Answer

How can I change the system main greeting on an Executone Model 64?


from any phone dial 436 and then press #, then enter managers mailbox usually 5000 and the password, by default it is 5000.
then 3, 8 and 1# for CCR 1,(or 2# for CCr2 and so on) and follow the prompts
if you need additional help, call me. 2033955027. Joe

Sep 05, 2014 | Executone 64 Corded Phone

1 Answer

How do I program the Executone model 64 LCD to


I assume you mean change the time and date and that depends on which system model you have....assuming you have an "IDS"...go to the receptionists phone ( the phone you reach by dialing 0 or 3001/ 301 ) and without lifting the handset dial 28 followed by the time in military format...if it worked you'll hear a few quick beeps after inputting the time. You might have an Executone Medley...if so > http://www.mainresource.com/PDFs/TipsMedleySysAdmin.pdf

If you have an older version of IDS you need to program it via a programming terminal or laptop. Leave your email here if you get this and I'll email you - can do it remotely via built in modem.

May 14, 2010 | Executone 64 Corded Phone

1 Answer

Looking for a manual for a soyo prive 32 model


divatude4023@yahoo.com


i have a soyo 32' flat screen tv. i bought it a couple of years ago, but i have a manual that i can photo copy and send you

Nov 05, 2009 | Televison & Video

1 Answer

Schematic for Executone tube intercom.


I might be able to help.  I have an exutone intercom amplifier as well and I was looking all over for schematics for a while.  Then I decided to open the thing up.  To my amazement a schematic was glued to the bottom plate inside the chassis.  Other than that if you know the model number perhaps we have the same one, in which case I can scan mine and send it to you.

Oct 24, 2008 | Audio Players & Recorders

1 Answer

Model 1B


you will need to have access to the phone system programming. you can do this through a laptop or through Operators programming if you have one there.
Once you are connected you will access A screen, then the EXT you need to program and then K for Keys. there is where you set up all of the programming on each key.
if you need more info, somehow contact me and I can help over the phone. Every system has a remote access through a modem that is built in on EVCM.card.

Aug 25, 2008 | Executone Corded Phone

1 Answer

Template showing what the keys represent is missing


all of the keys can be programmed with different key codes.
best thing you can do is press each one and see what it does. if you can get into programming of the phone system, then go to A screen and then that EXT, and K for Keys and you will see what is programmed on each key. You will see many codes, but if you put the cursor on each key you will see the description of each key abve key 2 and 3.
i hope this helps.

Jun 04, 2008 | Executone Corded Phone

1 Answer

Executone 64 Administrators manual


if you can get into the programming then first go to the B screen and then press A and set the drop pulse to 10 and then press C for Copy and then Y .
hit ESC and press J
the cursor should be blinking on the first line on top left corner, there hit F for Flash and press ENTER

Hit ESC and press A , put in the EXT you need to program the key for, then press Enter, then K, then K again and pick a key to programm. once you have picked one by pressing ENTER key to move the cursor program a code 815 ENTER, S for Subcode and then 1 Enter
ESC, ESC E for exit.

contact me for more info

Apr 17, 2008 | Executone 64 Corded Phone

1 Answer

EXECUTONE MODEL 64 Phone


quick way is to delete them both and re-record

Aug 08, 2007 | Executone 64 Corded Phone

Not finding what you are looking for?
Executone IDS 84500   Phone Logo

Related Topics:

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Executone Lands Phones Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

magna buff

Level 3 Expert

3828 Answers

Are you an Executone Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...