Question about Projection Televisions

1 Answer

FUSE WHERE IS THIS 231 FUSE AT

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 8,617 Answers

If your refering to an RCA I would need your model number some have the fuse other models dont.

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi I have a convergence issue. Is there a place in NYC where I can purchase these replacement items: (1) FL231 micro fuse (1) DL231 Diode (1) CL230 radial Capacitor I repaired the initial...


This DLP model RCA tv have convergence menu disappearing is very easy to fix just replaced the convergence fuse FL 231 near the FBT also must be resoldering FBT too.U can buy this FL231 covergence fuse at Ebay.com.No,but u must have to have a soldering iron,a desoring pump or desoldering braids and know how to basic soldering?To replaced this FL231 convergence fuse near the FBT and also must resodering the FBT too for protecting the new FL231 convergence fuse.

Mar 02, 2011 | RCA R52WM24 52" HDTV Projection Television

Tip

Hello I read ur answer to the Fl 231 fuse problem in rca projection tvs. I have...


FL231. FUSE.... The RCA ITC222 chasis has a common problem. and it not all that difficult to repair. Does your rca projection tv have read blue and green shadows? Does it have bowing in affect on the top and bottom of picture? when you turn it on does some thin red green and blue line bow in from the top then go away. The main question to determine if you have the fl231 fuse problem is if you go into customer menu then setup do you have the "CONVERGENCE' option. If you do not. then i suspect you have this problem. In the manufactering of these sets Lead free solder is used. now there is great debate over the use of lead free. connection tend to be more brittle. cracks develop around the solder connections of the high voltage flyback transformer. this very small crack set up oscillations in the cuicit with a 400 milliamp fuse. THis fuse cant take it. When this fuse blows the processor then does not know its a projection tv with three projection tubes. it thinks its a crt tube tv. and crt tube tv dont need "convergence" so it removes the convergence from the set.

TO REPAIR... 1. Warning. this set can generate leathal dangerous voltages even unplug do not attempt if you have no experence with electronics.
2. Remove the back. there a number of torx 20 screws.
3. what you will see is a number of circit boards There will be one on the right and one on the left. the one on the right is the small signal board. the one on the left is called the power deflection board. it has a large black part with a big red or black wire coming from the top, this is the flyback.Next to the flyback on the right of it there will be three small rectangular componets tan or brown in color. these are fuses. the one in the middle is the fl231 fuse.
4. getting to this fuse can be difficult. these two cuicit boards sit on a tray that is removable. to remove this tray it is pulled out and up. BUt watch the wires.loosen the wire tyes.
5 when you get the tray up the bottom side of the board can be accessed
you will now have to unsolder that fuse. one side of this fuse is under a plastic part of the tray. i have found the easest way is to cut away the plastic to get to it. if you dont want to do this you will have to remove the board. only remove half of the plastic brace
6. REPLACE FUSE RCA PART 259213
7 RESOLDER FLYBACK CONNECTIONS simply heat up and add a little solder
8 reassemble set. make sure you examine the set for loose connections.
9 and remember "BE Careful'

on Feb 19, 2009 | RCA R52WH73 Projection Television

1 Answer

Screeen is bowed and i have a ghost or 3d effect on the screen. the tubes may need to be converged, but not sure how.


This RCA DLP tv model have auto convergence at it menu,lost it from the menu or can't get to converge,this tv have a convergence fuse mean the convergence fuse FL(231) near the FBT-flyback tranformer is dead.U have a soldering iron,a roll of desodering braid or a desoldering pump and a roll of solders,also can do basic soldering.Try website like Ebay.com to buy a convergence fuse(FL231) to do the replacement.

Feb 07, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

A month the picture developed a bow where the color is sepaarted between blue, red and yellow.


Sounds like the convergence fuse FL231 and Diode 231 need replacement. You can get a repair kit called the ITC222 Convergence option missing repair kit which should solve that issue. The kit also contains instructions and is available from www.tvrepairworld.com

Jun 25, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Tv wont turn on


you need to check your solid state relay fl 231 dl 230 and cl 231 they are orange and they are by the flyback tube

Apr 09, 2009 | RCA HD61W66 61" Projection HDTV

1 Answer

Convergence


convergence next to flyback transfomer has 3 square like caps FL 231 is open most of the time it will cause lost of power as well as convergence.

Jun 02, 2008 | RCA HD56W66 56" HDTV

1 Answer

Convergence


try checking fuse 231 if that blows the convergence option will drop from the menu

Jun 02, 2008 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Convergence menu dissappeared


if its an RCA check the fuse 231 its the center fuse near the flyback.

May 29, 2008 | Projection Televisions

2 Answers

RCA R52WM24 52 in. HDTV won't stay powered on


sounds like you have more problems than just the fuse.. did you resolder the connection when you replaced the fuse. this is what causes that to happen.. fuses blown for a reason. ussally something is shorted. that particular fuse blows because it is a very small fuse and doesent take spikes in power to well. so when a intermittant connection begins to cause ossillations it shakes that poor fuse. it however sounds like you have more than that. does the led on the front flash when it shuts down.

Apr 05, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Rca r52wh74 - no auto convergance


you need to replace chemical type fuse marked FL231 part number 259213, it`s located next to the flyback transformer, theres 3 of them there but 231 is the only one I`ve seen cause your problem, replace it and you`ll be all set.Happy Holidays !

Nov 29, 2007 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...