Question about Kenmore Dryers
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I thinkl you can order the manuals from www.sears.com under the parts tab enter your model # also if it is an electric dry it is 220v with a neutral leg check with the local electrian to see if the power there is phased..Hope this helps
PS::The washer and the refrig will work on the tranformers
Posted on Jan 22, 2008
check to make sure you dont have a blown fuse or a triped breaker if they are fine if you have a volt meter take the back panel off on the control are or if it is the other kind losen up the two screws in the back of the control area and when you get it lifted up make sure unpluged then put the volt meter on the beep mode when probes touch then put it on the two spots on the swicth and push the button if it beeps it is good if it dont it is bad and that part dont cost too much another thing you should check before you do all that check make sure you have 220 volts on that plug if the switch is good and you have 220 volts it probably the motor or the timer they both or expensive
Posted on Jun 07, 2009
okay, kenmore elite have had these problems so often, you need to replaced the touchpad, not the board, jjust the touchpad, it cost around $150.00.
Posted on Sep 11, 2009
Tips for a great answer:
Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278
Dec 12, 2015 | Kenmore HE5 Electric Dryer
Jun 04, 2017 | Dryers
Mar 05, 2012 | Kenmore Dryers
Jan 17, 2012 | Dryers
May 01, 2011 | Kenmore Dryers
Sep 12, 2009 | Kenmore Elite HE4 Electric Dryer
Apr 01, 2009 | Hotpoint NVL333EY Electric Dryer
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: