My quick play buttons do not function properly ! example - The mute, volume, wireless, skip track play/pause and stop buttons do not work at all ! I tried installing an update but then my music didnt work so I had to uninstall it.

Basic CD Operation:
1. Power the unit ON if STANDBY mode by pressing the STANDBY ON/OFF(#3).The default
mode is RADIO,so press the FUNCTION button(#8) to switch to the CD mode.
2. Open the CD door by pressing the OPEN/CLOSE door release button(#9).Inset a CD with the
label facing upwards and close the door.
3. The unit will read the disc and display the total number of tracks found on the disc on the
display
4. To begin playback press the PLAY/PAUSE/BAND button(#1).The first brack on the disc will
play.
5. To pause playback press the PLAY/PAUSE/BAND button(#1) once more.Pressing again resumes playback.
6. Press the STOP button(#2) to stop playback.
7. Use the AL 1/VOL- or AL 2/VOL+ buttons(13,14) to adjust the volume level.
Advanced CD operation
1. Press the FWD/TUN+ button to skip to the next track.Press and hold to fast forward the
current track.Release the button to resume normal playback.
2. Press the REV/TUN- button to skip to the previous track.Press and hold to fast rewind the
current track.Release the button to resume normal playback.
Random playback
1. Press and hold the SLEEP/RDM button(#15) either during playback or in STOP mode for 2
seconds and then release.You will see the letters RDM appear on the display to indicate the
RANDOM mode in active.
2. If you enable the RANDOM function in STOP mode,press the PLAY/PAUSE/BAND button
to begin playback.If you enable the function during playback the next track will begin the
random order
3. To cancel the RANDOM playback mode,press and hold the SLEEP/RDM button(#15) for 2
seconds and release again.The letters RDM will disappear from the display to indicate the
function has been cancelled.
Repeat function
1. Before or during playback press the REPEAT/PROG button(#6) to repeat a single track
indefinitely.You will see REP appear on the display when active.
2. To repeat all tracks on the disc,press the REPEAT/PROG button(#6) twice(or once more if
you have already activated the repeat once function).You will see REP on the display blinking
to indicate the repeat ALL function is active
3. To cancel any repeat modes,press the REPEAT/PROG button(#6) once more(if in repeat all
mode or twice if in repeat once mode).The letters REP will disappear from the display.
CD program playback.
NOTE:You can only program a playback sequence while the disc is in STOP mode.
1. Press and hold the REPEAT/PROG button(#6).You will see P01 appear on the display to
indicate the program function has been initiated.
2. Use the FWD/TUN+&REV/TUN- buttons to select the track you want to play in slot No 1.
3. Press the REPEAT/PROG(#6) to store the selected track in slot 1.The display will now
display P02 to indicate your selecting the track for slot 2.
4. Repeat steps 2 to 3 for every track you wish to program up to a maximum of 20 tracks. If you
try to program more than 20 tracks the display will revert back to P01 and will overwrite the
first slot again.
5. Press the PLAY/PAUSE/BAND button(#1) to begin the programmed sequence playback.
6. Should you wish to cancel the programming you can press the STOP button to resume normal
function.

No idea which program you are talking about, but I would try Ctrl-S for starters...

http://static.highspeedbackbone.net/pdf/Gateway%20NV57H%20Series%20Notebook%20PC%20User%20Guide.pdf

Pages 17 and 18

You don't need to activate the drivers. if you reinstalled them then they are there and should be working.

There should be alternate methods to using the quick touch keys, such as using the conventional methods.

For example to change your volume, just click on the megaphone at the bottom right near the time and adjust the volume. Or click Start/Control Panel and look for Audio or Sound and adjust the volume. Also click Start/Programs/Accessories/Entertainment and see if there is a volume control there. Also normally you can adjust the volume by keystrokes. Normally you would Press and Hold the FN function key near the bottom left portion of the keyboard and press the volume keys (there should be 3 volume keys, volume up, volume down and volume mute).

As for the Wireless there is a switch on the side or in the front of the laptop that controls the wireless. Also there are keystrokes that can toggle it off or on once the wireless switch is on. Normally you would Press and Hold the FN function key then hit the correct F1 thru F12 key that toggles the wireless. The correct F1 thru F12 key to hit will have the icon of a wireless signal )))) or it will have the icon of a tower with a wireless signal )))).

Hi there.
I'm assuming this is the CD Player you own :

http://www.craigelectronics.com/product_detail/personalCDPlayer/CDM2891.html

I only ask as this brand does not exist in England. However I know that if your portable CD Player is cutting out sound, this is due to excessive movement fron being in a pocket or from being in a bumpy car. The cutting out is because the "Antishock" has not had a chance to store the music information, so instead the unit just pauses or cuts out sound.

-> Once = Skip track forward
<- Once = Play from start of track or skip backwards
Hold down either of these to fasst forward or rewind
The square means stop
II = Pause (press again to resume....sometimes pressing play will resume too)

These are universal key functions. Having not seen the item before, I am unable to guide furthur unless you can direct me to some pictures that I can see the function buttons larger and can explain what they do

All the best

Typically with the Plantronics Backbeat 903 Bluetooth headset, you should be able to move forward or backwards one track. Press and hold the volume/tracking/mute button forward or backwards for each track. You should hear a single low tone for each track change. Below is a link for the Backbeat 903 user guide.

Plantronics Backbeat 903 User's Guide

Good luck from Headsets Direct!

The media control buttons give access to volume control, skip, pause/play, and stop. The buttons are capacitive, and glow blue when the laptop is on. To the right of the media control buttons are four buttons that perform programmable actions. By default, they function as wireless on/off, launch Internet, launch Bluetooth manager, and launch Acer Arcade. Also, in the top right corner is a button which turns virtual surround sound on or off.

I get it. The multimedia keys above the keyboard is not working. If I'm right, check if you have installed the HP Quick Launch buttons software. If not check in C:/SwSetup and you'll find a folder. Install the application and check if the buttons are working. If not, post back