Question about Panasonic DMR-E75V DVD Player/VCR

1 Answer

Record tv with Panasonic DMR-E75V DVD Player / VCR

I've tried to record tv for when Im gone so i dont miss anything, but all i get is a blue screen while recording and a fuzzy screen when i try to see if it worked. I am so lost i dont know if im setting the recording up wrong or if its set up the wrong way.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Not sure about this, but my guess would be that you don't have the correct channel set on the DVD recorder. It has to be the channel that you use to receive your signal, NOT the channel that you necessarily want to record. For instance- if you use channel 3 to receive your signal from dish, cable etc but want to record a program on (hypothetically) CBS which is (again hypothetically) channel 24 from your dish or cable provider you would go to "Prog/Check" on the remote, highlight the "New Timer Program" line and press "Enter", and then use the numeric buttons to select channel 3 (the channel you use to receive your signal, NOT 24, the channel you want to record). You will have to program your dish/cable box to provide the channel with the content you want to record, in this case- 24.
Not sure if that was your issue, but hope this helps.

Posted on Jul 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony ccd trv 308 had a error c 31:23 and c 31:22 , beeps when trying to play and record. Found the pinch roller jam inside , took it out and fixed it with heat shrink tube, error gone , camara runs good ,...


Did you possibly hook it up right to your tv? Where was the blue screen. How do you know it recorded anything if your not sure if it works right. Is the tape moving? Sometimes it may appear to be moving and really it's not. Hear isn't a good thing with a tape recording device. I know this might sound trivial, but I would read the directions if ya got them and make sure your not skipping a step. If you record on some machines you have to switch from record back to play mode. Where is the blue screen.

May 20, 2014 | Video Cameras

1 Answer

Im trying to hook up my dvd recorder to my dish network dvr i have a jvc tv im using the red, white,and yellow cables but i dont get a pic or anything


No problem. o.k. line in to Dish receiver, out of receiver into dvd recorder, out of recorder, into tv. all units need to be powered on to work with this set up. anymore help, find me on facebook, Mark D Villandrie

Mar 06, 2011 | Televison & Video

1 Answer

My camcorder screen stays blue when its in play mode.


Try to run a cleaning tape, it should solve your problem.

Aug 15, 2009 | Sharp Viewcam VL-Z1 Mini DV Digital...

2 Answers

Recorded play back is fuzzy


MOST LIKELY the RF out put signal is the same as a local tv chanel 1) try menue change rf output suggest rf 68! OR connect av leads (red white yellow)from the output of your vcr and connect the other end to an Av input eg AV1 on your TV use tv remote to select the AV input

Apr 21, 2009 | Insignia IS-DVD1001 DVD Recorder/VCR

4 Answers

How to fix fuzzy pic & red,blue,green lines on your screen?


Typically this is due to a convergence chip failure. This repair can be done pretty easy with the proper instruction. Have a look at this video to help determine if you truly have a convergence problem.

Jan 26, 2009 | Toshiba 57H82 57" Rear Projection...

1 Answer

Trying to record movies I have recorded on my dvr, the old unit I had recorded everything. this one keeps telling me anything I try to record is protected. how do I turn that off or work around it?


Try getting a dvd recorder that connects to the video and audio ports and record to that. Im not 100% sure but I believe it records whatever it sees on the tv screen

Dec 30, 2008 | Zenith XBR716

1 Answer

Vcr recorda blank when digital tv is put on standby.


this is because you are recording a direct connection (what is on the screen is recorded) that is an option with some equipment.. unfortunately this means if there is nothing on the screen well you get nothing..

You need to record from the machines own built in tuner dont use direct record.. a vcr/pvr/dvdr after all remember is like a tv without a screen that can record it has its own channels to do this

Sep 30, 2008 | Televison & Video

1 Answer

Recording tv from a vhs player


sound like you have a dirty video head, try cleaning the head with some isopropyl alchol. if it does not fix your problem, then you will have a bad video head. good luck

Feb 15, 2007 | Samsung DVD/VHS/MP3/SVHS Playback

Not finding what you are looking for?
Panasonic DMR-E75V DVD Player/VCR Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...