Hi have a bebecar travel city but dont know how to fold it down.help

Hi
We recommend you contact Bebecar for assistance
Bebecar Baby prams pushchairs strollers accessories and nursery

Hi Sandra,

We recommend you contact BebeCar directly for assistance.

To fold a Multipla chassis, you must first lock the swivel wheels in the non-steering mode and ensure that the adjustable handle is in one of the middle positions. To fold it, firstly press the red button and simultaneously, turn the handle collar, in the middle of the handle bar, in the direction of the "FOLD" arrow, and the chair will begin to close. Next, operate the secondary safety device by pulling upwards the plastic tab situated on the right hand side. Tilt the chair forward and continue the folding action until the chassis is fully closed. If you want to store the pushchair, fold the adjustable handle down. Find out more by asking [email protected] for a user-guide.

If you need a new M City basket, it's best to get in touch with [email protected]. They are sure to be able to help!

Hi,

The details are as follows ;-

1. Chassis folded size - 36.6 in X 20.5 in X 8.7 in
(93cm X52cm X 22cm)

2. Chassis weight - 25 lbs (11.4 Kg)

3. Carrycot weight - 15 lbs (7 Kg)

4. Seat weight - 13 lbs (6 Kg)

5. Seat width - 13.4 in (34 cm)

6. Handle height - 37-42.9 in

7. Wheels - Swivel

8. TSC - Yes

Good Luck!!

Thanks!!

To fold the buggy, it is necessary to operate both a primary lock, and then a secondary lock. Start by making sure that the front swivel wheel is locked. Operate the primary locking device by pulling upwards on both of the plastic tabs located on the side of the handle arm just below the foam handle grip. Begin pressing downwards so that the pushchair begins to fold. Next, release the secondary locking device (raising the bar located lower down on the left-hand side) and continuing pressing downwards on the handle bar until the pushchair is fully folded. The handle bar can then be folded inwards to the maximum, by pressing simultaneously on the adjuster buttons on either side. Finally, with the chassis laid down, lock it into its folded position by closing the folding latch operated on the side.
Operating instructions, with diagrams, may be obtained from [email protected]
I hope that this is helpful. Do leave some feedback, so that we know how you got on!

You can obtain instructions for most Bebecar pushchairs by emailing [email protected]

To fold the Raider AT you need to turn the twist grip in the centre of the handle in the direction of the arrow. The secondary lock is located just below the rubber handle grip on the right side, slide this up. You can obtain instructions by emailing [email protected]

there should be two clips on that side that come apart then it should fold in half

Hi, I have just bought second hand the exact same pram. You have to push in the red button in the middle of the handle, then turn the handle down towards the floor. By putting a little pressure on it it should now start to fold down. Hope this helps.

I have my own dilemma though. When the carry cot is on as a forward facing pram, does the seat unit come off that you use for the buggy?