Download video from camcorder to computer.

You will require a firewire cable.
Usually a 4 pin to 6 pin cable. 4 pin to camera 6 pin to computer, assuming you PC has a fireiwre socket.
PC computer have Movie Maker as part of the OS.
Connect with the above cable and you should be good to go.

Al

It would probably be simpler to buy a card reader. This will also be easier in the sense that you won't be powering the camera while the card is in the computer with the card reader.
Make sure that the camera is turned on while it is connected to the computer and you're trying to sync it.

Please click on the link below to download the drivers for this Product.

http://www.pricecomparehelp.com/page/3893.html

if you are using a memory card , get a memory card reader that will work in a usb port on your computer

http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/OTHER-SCANNERS/Sony-DCR-HC19E-TWAIN-Patch.shtml

Go to this website to download the driver you need. Load it and then reboot computer and it should be able to see it.

try to put it on your dvd rom of computer and see if its working. if you can see the files on your computer, then burn it in nero sofware. so that i will watchable by your dvd player. hope that helps!


CHARCOIS

USB transfers for both Windows and Macintoshes are covered in the software guide at this link

jvc link

Download and install adobe reader if needed

Right mouse click and save target as for each manual to save in a file.

Read appropriate parts of software guide (36 pages total in the manual you do not need to read them all) covers file downloads.

This camcorder should not require a driver in order to capture the footage. Start up your capture software, power-up the camera in VCR mode and then connect the Firewire cable. It should then allow you to playback the tape and capture the contents.
Here is the manual online:
http://resources.jvc.com/Resources/00/00/94/LYT1353-001A.pdf
If you need a simple program to capture the footage look to: http://www.virtualdub.org/

Your video-editing software (including Windows Movie Maker) should also capture the footage.

hi i just bought the jvc gr d370 u and how do i tranfer movies to this navigation cd that cam with the camcorder