- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
To put the message in a specific mail box, the caller needs to press *1, *2 or *3 (touch tone phone) before leaving their message. (Of course the answering system has to pick up before the key stroke.) Obviously the number corresponds to the mail box that will get the message.
So if you want to include these directions in your outgoing message, you would need to add something like "To leave a message for John press Star 1, for Sam press Star 2" when you record the ogm.
To use your system from a remote telephone, you must first enter a 3-digit remote operation security code. The security code label is located on the bottom of the system.
1. Dial your phone number.
2. When your outgoing message is playing, enter your remote operation security code. Bd appears on the display to indicate the system is in remote mode.
If there are no new messages, you hear three beeps. These are the remote codes available to you:
2 # Play all messages. 2 5 Play new messages. 3 # Delete all old messages. 7 # Record new outgoing message. 7 # Stop recording outgoing message. 8 # Record memo. 8 # Stop recording memo. 9 # Turn system off/on. 0 # Monitor the room..
If you have the Digital Answerer in White with Extended Recording Time TAD-3808, then slide the Ring Select switch on the right side of the unit to the desired number of rings. TS = toll saver and answers after 2 rings if there are new messages; , otherwise, it will answer after 4 rings.