Question about JVC Televison & Video

1 Answer

My jvc 1080p shows no input selection for "tv" . It only 3 video inputs and no tv input anymore. There used to be more items shown when I hit the INPUT button, including the choice for tv. But now, no choice for tv. So, I cannot watch television namely my cable box

Posted by on

  • tonyshizzle Jun 15, 2008

    did not remove any cover but, I did turn off tv (still plugged in) a go for a nap during lightening storm. When i got up - problem. thanks for your help guess i need repairman, huh?

  • tonyshizzle Jun 15, 2008

    Many Thanks!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 8,617 Answers

Did you remove the rear panel of the set while the cord was still plugged in? Doesnt have to be on, if the rear cover is removced even for a second while the cord is plugged in you have destroyed the digital circuits and they will need to be replaced with the entire array of signal boards. JVC HDTV have that feature built into them so the average person cant do repairs without disableling that feature.

Posted on Jun 15, 2008

  • Sonny Berry
    Sonny Berry Jun 15, 2008

    I would recomend a repairman as JVC is one of the few sets that have features built in that actually harm the set if youre not aware of them.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 47" Visio 1080p. Tv is always set at hdmi


AV inputs are for standard analog video which is 480i. HDMI and Component inputs are the high definition inputs that run at either 1080i or 1080p You won't ever get 1080i or p through AV inputs.

Oct 22, 2012 | Televison & Video

7 Answers

Sky new zealand say my hd z70rx5 is unable to recieve hdcp even though the specs say the set is HDMI AND HDCP complient,they say no rear projection is able to receive hd is this true,any help i would be...


Terminals and Connections Dual HDMI digital inputs with HDCP (High Definition Content Protection) offer an uncompressed solution to the transmission and display of high definition video and audio content. All JVC HD-ILA TVs also include dual auto sensing component video inputs, assuring the best possible picture quality whether a viewer is using DTV, D-VHS or DVD, and three S-Video (two rear, one front) inputs and four AV inputs (three rear, one front).
hdmi.gif High Definition Multimedia Interface
HDMI is a new standard digital connection between A/V devices, such as a set-top box, DVD player or A/V receiver, and a digital television. HDMI offers exceptional video and audio quality with a single quick-disconnect connector. It supports multi-channel digital audio transmissions and component video color spacing for true rendering of HD video.
We carry a full line of high-performance HDMI cables. See them here...
Audio Features The JVC BBE High Definition audio system with Advanced HyperSurround and Active Hyper Bass includes two direct-drive speakers mounted underneath the screen for rich, expansive sound that fills your home theater or TV room.

Aug 06, 2008 | JVC Televison & Video

1 Answer

I would like to use my jvc home theater while watching tv. But i have no idea how or what wires to use to make this work.


You will need a 2RCA to 2RCA audio cable as shown below. Connect the audio out socket of your TV to the Aux or TV/SAT input of the JVC. When you want to hear the TV sound through the JVC system just select the appropriate input on the JVC. If you want the surround speakers to work, select ProLogic or All channel stereo on the JVC's surround settings.Because by default the radio or TV sound is only stereo, so only the front left and right speakers will work. PLII will convert 2 channel to 5.1.

Apr 26, 2011 | Audio Players & Recorders

1 Answer

For some reason, my DVD player just started showing up in black and white. Also, when I select the "source" on my TV remote, instead of showing the option "AV" for the DVD player, it...


Select AV as your source and that should cure the problem as long as you have the video and audio cables connected to the right inputs. You could also use an S-Video cable instead of the video cable for better picture quality depending on your TV model (assuming it has a S-video input). Your owners manual(s) will probably have diagrams for you to follow.

Jan 30, 2011 | Panasonic DMR-ES40

1 Answer

Hey My Jvc tv has 2 HDMI input but when i plug in my ps3 slim into the hdmi input 1 no picture is shown can u please help me


hi,
is ur tv is a full HD one. because the ps3's HDMI out is a full HD 1080p video. did u get the video on HDMI 2. if it is there, then check the connection u made to HDMI 1. if u didn't get video on both then u should down scale the video setting of ur ps3 to 1080i( if ur tv is not a full hd one). also check through component video input.
ok

Dec 22, 2010 | Televison & Video

1 Answer

Tv is showing 480p and we want it at 1080p on our new Toshiba 40XV648 40-Inch 1080p 120Hz HD LCD TV Cinema Series.


After searching the owners manual I find that there is nothing mentioned about the screen resolution i.e. 480p to 1080p.

This set is capable of your desired resolution and as far as I can tell it auto selects because it senses the input video and decides which is the best setting for that source.

It's important to understand that you need 1080p video to use it at it's full capabilities. It won't give you a 1080p resolution from a VCR or a standard DVD player. You need a DVD player that is capable of producing a 1080p encoded video. Some satellite receivers are capable of that but you need to make sure you know what resolution that you are sending to the television.

Local TV stations won't usually broadcast HD at 1080p. Your best bet is to use a DVD player that is capable of that high resolution for your best picture.

Please note that what it says in the owners manual about "Resolution" has nothing to do with the 480p, 720p or 1080p signals, your set selects that automatically it will start by selecting the 1080p then goes to 720p then 420p it's dependent on the video you send to the set.

Please note the "resolution" function is actually like a "sharpness" control.

Your video input (tuner, VCR, DVD, games and etc.) is likely your problem.


Mar 30, 2010 | Televison & Video

2 Answers

JVC 40 inch LCD digital inputs (1 and 2) no longer works. Standard video and component cable inputs work, but not HDMI. Please help


This TV has a sensor that deactivates the inputs when light is sensed. perform this procedure to correct it:

1. press "Sleep" button on the remote
2. while "Sleep timer 0" is showing, simultanuously press "display" and "video" button on the remote
3. you should be in the Service menu of the TV....if not you should do the steps again
4. select "self check" from the displayed options.
5. when the "self check" menu is displayed, Power off the TV.
6. unplug and replug the TV.
7. Check the digital input.

if the input never worked for you, it is possible that you have the DVD/Bluray/whatever set up incorrectly. I don't think this TV accepts 1080P resolution so make sure it is set to 1080i or lower

Jun 23, 2009 | JVC LT-40X776 40 in. LCD HDTV

1 Answer

JVC LT-Z37SX5 no sound when using hdmi connection to HD box


the tv has a configaration that conveys the sets focus on both audio and video performance. full hd resolution of 1920-1080 pixels.
hdmi inputs allow connection of the generation of 1080p sources for the systems which offer 1080p outputs

Jan 12, 2009 | JVC AV-36D303 36" TV

1 Answer

Cannot get 27" jvc av-27530 tv to recognize playstation 2


Do you have the remote? You will need to cycle through the inputs to get to video 1 or 3. You might have the buttons on the front of your tv that says tv/video or tv/vcr. If not go down the channels past 1 and it might automatically switch through the video input selections. For any of these solutions have the PS2 plugged into video 1 and turned on. Hope this helps.

Jan 04, 2009 | JVC AV-27530 27" TV

1 Answer

Video input selection remains displayed - can't get rid of it


The solution to your remote problem is to go to wal-mart and when you go through the check out lane there is usually some last minute items. there is a silver remote that is usually hanging in those aisles and that has been the only one I have found that works.

May 20, 2008 | JVC AV-27530 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...