Question about Cisco 7941G-GE IP Phone

2 Answers

How power need Cisco 7941G-GE IP Phone - Cisco 7941G-GE IP Phone

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

If you are going to use a Power Over Ethernet switch, make sure it is 802.3af compliant. For Cisco, I would recommend the Catalyst 2960 or 3560 Series PoE Switches. If it's just a single phone, you might just consider using a Cisco CP-PWR-CUBE3 adapter.

Posted on Dec 05, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

These phones can take their power from a Power over Ethernet switch, where all you need to do is plug the phone in to the switch and it gets its power from there.

You can also get power cubes for these phones, but they do not come with the phone as standard, as most people like the convenience of having the power coming from the switch, and not needing to use up a further power socket in the floor/wall.

Hope that this helps!

Posted on Nov 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to modify the settings of my cisco ip phone 7941


Complete these steps:
  1. Unplug the power cable from the phone, and then plug in the cable again.
  2. Immediately press and hold # and while the Headset, Mute, and Speaker buttons begin to flash in sequence, release #. ...
  3. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

Aug 04, 2015 | Cisco 7941G-GE IP Phone

1 Answer

Dell latitude e6500 disconnects ethernet after 20-25 minutes. tried changing power save settings, sleep, and hibernate settings. nothing works


Control Panel>Add/Remove Programs>Dell Control Point System Manager
select change> next> click modify> Internal Network Card Power under Power Manager> “This feature will not be available”

Nov 28, 2009 | Cisco 7941G-GE IP Phone

1 Answer

Can I hook a 1131ag LWAP directly to a 7941g?


If the 7941g is the cisco cp-7941g ip phone then no you can not since the ip phone only has ethernet connections and the airap1131agak has only wireless connections on it as it is a wireless access point, so you will need a wireless router or something similar to get the wireless to ethernet cable.

Oct 29, 2009 | Cisco Aironet 1131AG (AIRAP1131AGAK)...

1 Answer

CISCO 7941 IP PHONE disconnect you out after certain time


Unfortunately this is a very common problem with Cisco's IP Phones. It can be caused by either a faulty hookswitch or a damaged jack. Both of these problems can be remedied by contacting IdacomUSA.

Apr 06, 2009 | Cisco 7941G-GE IP Phone

1 Answer

CP 7941G issue


Try configuring CCM IP address either trough DHCP parameter, or Network configuration on the phone.

Oct 08, 2008 | Cisco 7941G-GE IP Phone

1 Answer

7941G-GE Locking Up


This can be caused by corrupted firmware, or possibly damaged circuitry. IdacomUSA is your best bet. Your phone will be completely refurbished, and sent back to you within two weeks and comes with a 2 Year Warranty on the phone.

May 12, 2008 | Cisco 7941G-GE IP Phone

3 Answers

Inline power problem: cisco ip phone 7941G


You need to ensure that each port that has a phone plugged into it is configured with power over ethernet configured switched on.

Mar 20, 2008 | Cisco 7940 IP Phone

1 Answer

Ethernet Disconnected message in POE 7941G IP Phones


the first problem will be to check or replace the cable that you use to connect the phone or check the jack that you use

Jul 12, 2007 | Cisco 7941G-GE IP Phone

Not finding what you are looking for?
Cisco 7941G-GE IP Phone Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

brian soufane

Level 3 Expert

693 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...