- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I finally got the menu button to work by firmly pressing downward on the mode dial while turning it. Once the menu opened, I went to set-up and initialized all settings. This action reset all the settings to default and now all of the buttons are working.
Hi Have you turned the mode lever to the point at the setting that looks like a little camera, some thing like [O].
Try This: 1. Turn the Mode lever to [O] 2. Press the function button. (Found to the left of the eyepiece/viewfinder) 3. Use the up and down buttons to get to the setting you want to change (found on the dial to the next to the LCD screen). 4. When you get to the setting you want to change use the right arrow to enter and make the change use the left to go back to the main menu.
If the camera was dropped, then it's really causing those kinds of issues like mode dial and shutter button will not work.
But you could still try these steps below:
First, do the POWER RESET: - Turn off camera - Remove batteries for a minute - Reload batteries - Turn on camera
Second, do the MASTER RESET - Press on MENU button - Press on the right button until you see SETUP 2 - Scroll down until you see RESET - Press the right button to pick up on YES or NO - Press on OK/MENU button for changes to be saved - Turn off camera for a few seconds so that settings will be refreshed
Third, if it still does the same thing, then your camera needs to be repaired by a technician.
If you want to know where you could send it, just call the hotline of the manufacturer of your product so you could get assistance about this matter.
This camera has four flash modes and each time you press the button the mode changes. As you press the button you should see the indictor in the upper left side of the screen. 1.In automatic flash, the camera will decide if you need flash or not. This mode does not have any indicator on the screen 2.Forced flash, this will cause the flash to be constantly on. The indicator looks (kind of) like a lightning bolt. 3.Slow Syncro, this mode slightly delays the flash and is used to lighten up the background more the foreground. The indicator looks like the lightning bolt with SL next to it. 4.No flash, this will turn off the flash. The indicator looks like a lightning bolt enclosed by a circle with a diagonal line through the lightning bolt. (similar to a no parking sign).
If you don’t see the indictor changing on the screen the switch behind the button is malfunctioning.
if you see no reation of the pressing of the button i.e. no focusing, no error message nothing , then most probably a simplest problem , the shutter release button may not be working for few reasons :
1) defective switch.
2) defective flex cable.
3) camera exposed to some physical jerk or dropping resulting into disalingment between inner switch and the shutter release button.