Question about Schlage BE365-CAM BE365CAM505 Lifetime Polished Brass Electronic Security K

1 Answer

How do you enter a code to lack/unlock the doorknob

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 963 Answers

"How can I program my electronic keypad lock when the instructions with the Programming Code have been lost?"
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security--Keypad deadbolt 365

Good luck--and please provide feedback if this helps!

Posted on Nov 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cifial doorknob


I never seen a doorknob on a laptop before, I would love it if you post a picture.

Aug 26, 2014 | Computers & Internet

1 Answer

Cifial doorknob


You could use a needle.

Aug 26, 2014 | Computers & Internet

1 Answer

Cant find a free unlock code


When it comes to unlock your mobile. i recommend you to choose the right and reliable vendor. Free stuff often lacks quality so its best to choose the paid stuff.Is it locked to your network? And you want to use to any other network globally? If yes, then you need to unlock your mobile according to the network you reside , Its a paid service. first find out your mobile phone IMEI number. You can find this by typing in *#06# and then hitting the enter o rsend key on your Iphone . This number is completely unique to your phone and will be used to generate or calculate an unlock code for your mobile.Then the unlock code here http://www.mobileunlocksolutions.com/sony-ericsson/rs1wp8/
Mobile Unlock Solutions The Ultimate Website For Mobile Phone Unlocking using
unlock code specified in it you can proceed unlocking your mobile.

Feb 05, 2014 | Sony Ericsson Cell Phones

1 Answer

How to put the striker from a door knob kit back together


i can help you with that...just follow this steps...
1.Remove the old doorknob by taking out the screws that hold it in. You will have to remove the striker separately by removing the screws that hold the strike plate in place on the outside edge of the door. Slide the striker out.
2.
Take the new doorknob, striker, and strike plate out of the packaging and look for the directions. (Most doorknobs are installed in the same way, but there are always exceptions.)

3.
Slide the striker bar into the hole. Insert the screws into the striker plate and tighten.

4.
ake the two halves of the doorknob, and place the one with the male end through the hole in the striker bar. Place the female side of the doorknob on the other side of the door and make sure that it lines up with the male end. Slide the two together. Screw the knob together using the two long screws that came with the doorknob. Make sure that the screws are tight. Make sure that you have the lock facing the right direction. You want the locking mechanism on the inside of the house or room.

5.
Test your work before you shut the door. Make sure that both sides of the door knob turn and the striker bar goes back and forth.

:p

Dec 01, 2011 | Hardware & Accessories

5 Answers

Unlock codes for a 8700 tellcell pnone


Hi,
It is very easy to unlock Blackberry 8700 just enter simply enter unlock code through keypad.i did find a third party. i had unlocked mine.it work perfectly.which might help you find the cheapest solution.Have you tried your network provider for free code?
Hope this help

Jul 23, 2010 | RIM BlackBerry Pearl 8100

1 Answer

The key still goes easily into the doorknob


can be easy as wd-40 squirt of oil. try that first... then on to more drastic measures

Dec 13, 2009 | Schlage BE365-CAM BE365CAM620 Antique...

3 Answers

Need a unlock code to unlock my blackbery pearl


First you need to request for unlock code from you are operator (customer care). Once you receive you are unlock code please follow the steps
  • 1.You need to"Turn all connects off" (manage connection).
  • 2. Select Options.
  • 3. Select Advance option.
  • 4. Select sim card.
  • 5. Type MEPD. 6. Type MEP2.
  • 7. Type the Unlock code.
  • 8. Press enter.

Nov 25, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Bathroom doorknob stuck in locked position.


Hello,

I will tell you how to fix 'em. Open the Door Knob with a screw driver, gently pull aart the two knobs once open, then look for a long sliding rod, pull one knob away, twist the Knob untlil it is in unlock position, put them back together to test if it slips properly. If it does not, there is something preventing the rod from rotating freely. Try to ensure it rotates freely. Then screw back together :)

Nov 18, 2009 | Hardware & Accessories

Not finding what you are looking for?
Schlage BE365-CAM  BE365CAM505 Lifetime Polished Brass Electronic Security K Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schlage Locks & Locksmithing Experts

JOHN LAPIER

Level 3 Expert

2428 Answers

ken skalski

Level 2 Expert

152 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Are you a Schlage Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...