Question about Kenmore 46462 Front Load Washer

2 Answers

Kenmore front load HE2 plus

Error code F appears in middle of cycle. Will not spin

Posted by on

  • 3 more comments 
  • jillathub Jun 22, 2008

    All the buttons light up right after the middle of the first cycle and the door stays locked.

  • Anonymous Sep 05, 2008

    ALL THE BUTTONS LIT UP AND THE HE2 PLUS SAID F SOMETHING THE DOOR STAYED LOCKED I BELEIVE IT WAS DUE TO OVERLOADING

  • wildwahine Sep 08, 2008

    Hi,


    I'm getting F25 code on my Kenmore HE2 Plus washer. All buttons light up with F25 code.  I can't find code in manual.

  • arnizzle3000 Jan 17, 2009

    My Kenmore Front Loader HE 2 Plus in the middle of the cycle it says F on the front and all the lights light up...I am going on vaction and will deal with it later I just want to open it and get the clothes out,

  • Toby Norton
    Toby Norton May 11, 2010

    What "F" Error code is it? The code will direct you to where you need to look for the problem. Does it drain?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a F01 error message on my Kenmore He2t washer. I tried to add clothes to a wash and restart and continue to get the message. Please help

Posted on Sep 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 246 Answers

We have not heard back on this in about a week. I'm presuimng It's been repaired?

Posted on Jun 21, 2008

2 Suggested Answers

  • 5 Answers

SOURCE: Kenmore HE2 front load washer. All cycle lights flashing plus spin and clothes clean lights on.

I'm sure this is probably too late, but hopefully it will help some else. I just had the same problem. First, unplug the power. Then take the lower front panel off and grabbed a bucket. Place the bucket under the large "plug" on your right. This is the drain. Slowly unscrew the drain plug, Hold your nose as it will probably smell. Allow the water and such to drain into the bucket. When you see the blob of wet lint drop into the bucket you will know why the machine refused to work. Make sure you clean the drain plug and screw it back in tightly. Put the lower panel back on and reconnect the power. I hope this resolves your issue.

Posted on Oct 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore HE 2plus front load washer and during any wash cycle the drum won't spin and at end of cycle displays F01


Front-loading washer Kenmore HE2 plus - spinning not ...

www.shopyourway.com > Manage My Life > Questions
My Kenmore HE2 plus washer has problems with spin funciton. almost all of the ... or twins size blanket, it just won't spin, even with extra spin cycle only. ... Check to see if the washer will spin without any clothes at all in the basket. ... My HE2 will wash a very small load. ... Any bigger loads The drum will try and turn but wont.

Front Load Washer Won't Drain or Spin Video: Washing ...

? 1:54
https://www.youtube.com/watch?v=wlMoT9rgvAg
Jun 1, 2012 - Uploaded by searspartsdirect
... won't drain or spin. For more front load washing machineinformation and repai. ... If the cycle has completed and water is still left in the machine select "Drain and Spin" to remove anywater remaining in the washer. This can be caused .... I have aKenmore HE2 plus front load washer. I can't seem to get it ...

Kenmore HE2 Plus 3.6 cu. ft. Front-Load Super Capacity ...

www.kenmore.com > Laundry > Washers > Front-load Washers

KenmoreFront-Load Super Capacity Washing Machine (4753) .... super wet, and to spin the empty drum after each load to hear if anything was caught in that gap. .... 1st of all: You cannot use any other detergent than HE rated detergent - PERIOD. ... will create too many suds and clog up the machine, and the clothes won't be clean.

Jan 15, 2016 | Kenmore Washing Machines

1 Answer

F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.


what's f24 code? - Kenmore Elite HE3 Washing Machine ...

https://www.ifixit.com/Answers/View/85549/what's+f24+code

iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

F24 Error Code on My Kenmore Washer ' eHow

www.ehow.com > Home
F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

Kenmore HE2 Plus Front Load Washer F24 error code ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

I have a Kenmore HE2T error code F24 - Fixya

www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
Dec 9, 2009 - Posted on Dec 09, 2009.

Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have a kenmore HE2 plus with error code F33 and F21. Washer is not fully spinning out and remains full of water at times and other times it does. What are the error codes and can it be fixed. Needs...


The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

CLICK HERE


Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa&^%%$

Jan 08, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore fHE 2 plus front load washer does not drain and does not complete the spin and drain cycle. Error code f-21.


Means the drain is too long. Under the front lower panel is a sump filter. Remove the filter by turning ccw and clean.

Nov 04, 2010 | Kenmore HE2 Plus Front Load Washer

2 Answers

Does anyone know the code to make a HE2 Plus "spin only"?


select the Spin/Drain cycle. any special code would have been the service/diagnostic mode but that wants to run a factory test which involves water fill and agitate

Apr 28, 2009 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Kenmore 46462 Front Load Washer Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...