Question about Moulinex Juicers

1 Answer

I have a Moulinex Juicer JU500 800W 'The Juice Machine' which worked fine when i put it away seom months ago, when i came to use it recently it wont switch on, i am sure i have completed all the safety actions required for it to start and i have checked its not the fuse in the plug. Any ideas what to do next? Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cannot get screws out......which screwdriver needed?

Posted on Dec 31, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

espressonist
  • 1711 Answers

SOURCE: Switch has gone on Moulinex

Turn the body upside down. You will find four screws in each corner. Unscrew them fully and lift the bottom base up. The rotor complete with fun will be in the center and in the side of the upper body part will be the switch. You will need to press with a screwdriver as a lever on one side and then to the other and pull of external and here it is out. Just take care to put the wires in the same position, you can take a photo before proceeding so will have a reference if you forget anything on your way back to assemble it.

Posted on Sep 18, 2010

  • 1 Answer

SOURCE: Juicer stopped working

Fuse may be blown. Take off bottom, it is soldered to the circuit board. Unsolder and replace (I use a fuse holder) to make it easier

Posted on Jul 12, 2008

  • 69 Answers

SOURCE: Champion G5NG853S Household Juice Extractor

Juicer has to be attached, little magnet on the bottom.

Posted on Mar 01, 2009

  • 69 Answers

SOURCE: Champion juicer don't work

You have to have the juicer attached, there is a little magnet that allows the machine to turn on.

Posted on Mar 01, 2009

  • 1 Answer

SOURCE: rival juice extractor model 965

I HAVE LOST THE BOOK AND PAPERWORK TO MY RIVAL JUICE EXTRACTOR MODEL 965. IS IT POSSIBLE TO GET ANOTHER BOOK AND PAPERWORK FOR IT?

Posted on Jul 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to assemble parts of Masterchef 750 duotronic moulinex juicer ?


User Instructions - Moulinex UK

www.moulinex.co.uk/pages/download.htm?OnpageA=2
The Moulinex concept is to reinvent the art of living at home: Inspired products that benefit & complement ... Ocealys aquavision (873Kb) ยท Masterchef (342kb).

Oct 07, 2015 | Moulinex Juicers

1 Answer

My juicer leaks under the spout. I can not figure out why. I have checked all the assembly and all the directions. It is only the second time I have used this. My machine is brand new. Any though


The spout, itself is hinged. It has two positions, an upper and a lower position. (Similar to a light switch). Make sure it is in it's lowest position when making juice, otherwise the liquid will collect in the inner bowl and leak out the sides of the juicer. Move the spout to the upper position to temporarily stop the flow of juice, such as when you change glasses or receptacles. Then, put the spout in the lower position to resume the flow of juice.

Dec 26, 2012 | Jack Lalanne Power Juicer 250 Watts

1 Answer

I do not know how to use my moulinex product (moulinex type574 code 320)


Hi, WOULD PLEASE LIKE A PICTURE DEMONSTRATION ON HOW TO USE THE ABOVE MODEL JUICER ESPECIALLY HOW THE ORANGE IS TO BE INTRODUCED INTO THE JUICER.
Thank you,
H.E.Ojim

Dec 29, 2010 | Moulinex A7534K 400 Watts Juicer

1 Answer

Juicier will not work at all


Try the juicer on another circuit to see if the breaker failed altogether on the circuit you were using. It's possible that the machine is drawing more power than it should and may need to be checked by an appliance service dealer. An electrician can also check the power draw at the breaker to see if it is being overloaded. If the machine itself is defective, it should receive professional service. Good luck!

May 07, 2010 | Champion G5NG853S Household Juice...

1 Answer

AMCE JUICER WON'T WORK


4 SCREWS HOLD THE BASE PLATE.
REMOVE IT AND HAVE A LOOK. THE
WIRING IS PRETTY SIMPLE. THIS THING
IS REALLY BUILT, SO IT MIGHT BE SIMPLE
LIKE YOU SAID. MINE IS 19 YEARS OLD
AND I HAVE PARTS FOR ANOTHER 19.

May 19, 2009 | Acme 6001 Juice Extractor

1 Answer

Champion juicer don't work


You have to have the juicer attached, there is a little magnet that allows the machine to turn on.

May 23, 2008 | Champion 2000+ Household Juice Extractor

1 Answer

Pomegranate


Well ya can juice 'em but it's a bit labour intensive .. lol 'cause ya gotta skin 'em, and get ALL the "Seeds" out, they taste bad... then put the pulp in.. and juice away... yield is low also .. but tastes real nice in the end.. I usually do it in a plastic bag,and tip the pulp into the juicer. Ya can make great "leathers" too..

Aug 04, 2007 | Jack Lalanne Power Juicer 250 Watts

2 Answers

Motor not working


Hi I had the same problem yesterday and emailed Champion Juicer about the problem here's their reply below, his suggestion worked. Hello Duane, Your machine is equipped with a magnetic start system which will only allow the machine to start when you have the screenholder all the way in place just as you would have it to start juicing. If you do not have any parts on the machine it will not start. Please assemble it again and give it a try. If it still wont start call me at 209-369-2154 for further assistance. Thank you Carl

Apr 16, 2007 | Champion G5NG853S Household Juice...

10 Answers

Champion Juicer stopped working


Hi I had the same problem yesterday and emailed Champion Juicer about the problem here's their reply below, his suggestion worked. Hello Duane, Your machine is equipped with a magnetic start system which will only allow the machine to start when you have the screenholder all the way in place just as you would have it to start juicing. If you do not have any parts on the machine it will not start. Please assemble it again and give it a try. If it still wont start call me at 209-369-2154 for further assistance. Thank you Carl

Nov 09, 2006 | Champion G5-PG-710 650 Watts Juicer

Not finding what you are looking for?
Juicers Logo

Related Topics:

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Moulinex Juicers Experts

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Tom Chichester

Level 3 Expert

33322 Answers

Are you a Moulinex Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...