Question about PC Desktops

1 Answer

I have a linksys wrt54gs router and if i hook it up to my cable modem my ip # is 192.168.1.100 and I can not get on the internet but if I un hook it and just hook up my cable to my wireded computer my ip # is 24.159.249.140 can you help me

Posted by on

  • ian prince garvilles
    ian prince garvilles May 11, 2010

    Hi.

    What what modem are you using? For you to connect you linksys router you need to set your modem to bridge.

    Pls let me know what type of modem you have. Thanks.

    Cheers.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 106 Answers

What's happening is that the Cable modem is obtaining the MAC address of your PC. By unplugging the ether cable from the pc and plugging it into the router, the cable modem will not obtain the new MAC address. It needs to be reset by UNPLUGGING the power cable for atleast 30 seconds and reconnecting it again. I'd do the same for the router as a precaution.

Good luck

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Router Problem


Try using the other connection (USB/Ethernet)

Also check your IP is set to automatic in Network Connections.

Dec 25, 2008 | PC Desktops

3 Answers

Well i had just bought a lynksys router from my friend with no software cd so right now i am trying to download the software online so when i switch my cox modem with the linksys modem i want the software...


You should be able to get any software that you need from LinkSys.com but I have a couple of quick questions first:

1. Is the LinkSys unit you just purchased a router or modem?

If the unit is a router, you are still going to need a Cox compatible modem. If the unit is a modem, you will still need a router to complete the network setup unless LinkSys makes a combination cable router/modem, and I haven't been able to research one.

2. If it is a modem, is it a cable modem and, if it is, is it Cox compatible?

According to the Cox Web Site, the only models of LinkSys modems that are currently compatible with the Cox High Speed Cable Internet Service are:

BEFCMU10 v3
BEFCMU10 v4
WCG200
WCG200 v2
CM100

In this particular case, you may need to contact LinkSys and/or your Internet Service Provider. In most cases, they will not only tell you exactly what type of equipment you need, they will also talk you through setting up the network once you have the equipment - usually at no charge.

Graye

Nov 25, 2008 | PC Desktops

1 Answer

I dont know haow to connect Linksys Wireless-G Broadband Router with SpeedBooster WRT54GS - wireless router


  1. Connect your modem to the Internet port of the router. Your computer needs to be connected to one of the 4 Ethernet ports at the back of the router.
  2. Access the router's setup page by launching Internet explorer and typing 192.168.1.1.
  3. It will ask for a username and password. Leave the username blank and password is admin.
  4. Once your in the setup page, set "Internet connection type" with what your ISP requires you to have.
  5. If you have cable ISP, usually it is "Automatic Configuration-DHCP."
  6. But if you have DSL ISP, then it will be PPPoE. You need to know your username and password from your ISP.
  7. Better yet, verify your Internet connection type from your Internet service provider.
Hope this helps!

Nov 09, 2008 | PC Desktops

2 Answers

Can Connect to internet via cable modem, but cannot connect from Cable Modem to LinkSys WRT54G router to PC to Internet ?


1. Make sure your cable modem is connected to the Internet port of the router.
2. Your computer should connected to one of the 4 ports at the back of the router.
3. Check the lights that are lit. Make sure the you have power(steady green), Internet, WLAN and Ethernet port light.
4. Press and hold the reset button on the router for 15 seconds.
5. After 15 seconds, release the reset on the router and turn it off.
6. Turn the cable modem off, too.
7. Wait for a minute. Turn the modem ON first. Wait for the lights on the modem to be ready.
8. Turn on the router. Make sure you have good lights on the router.
9. Check for Internet connectivity.

Nov 08, 2008 | PC Desktops

1 Answer

I have Verizon Fios install in my home. I use to have Comcast. This is the situation, before the Fios my linksys wireless router was connected directly to a modem. Now my linksys wireless router is...


Your IP address for you linksys router needs to be changed.  More than likely there using the same IP address such as 192.168.0.1.
You have to convert your linksys router to a switch and change the IP address range it uses to on that doesn't conflict with the Verizon router.
10.150.1.1 should work.

Oct 08, 2008 | PC Desktops

1 Answer

Limited or no connectivity to the internet. my setup: the telephone port is approx 30m from where i need internet access. Originally I had a dlink wireless router set up but was connected via cable, now...


On which port of the D-link router did you plug the WRT160N router?

Do this setup.

Disconnect the WRT160N from D-link.

Connect a computer to port 1 of the WRT160N. Access the setup page by typing 192.168.1.1 on the address bar. you may need to type in the username and password for WRT160N. on the setup page Change the LAN IP address from 192.168.1.1 to 192.168.2.1. save the settings.

Connect a cable from port 1,2,3 or 4 of the D-link router to the Internet port of the WRT160N. turn off everything then turn them on starting from cable modem>D-link >WRT160N then computer.

You should be able to access the internet.

Oct 08, 2008 | PC Desktops

1 Answer

Wrong IP Address


you will have to reset your router and or modem up. as they need input for isp name password etc this could be the main problem
also you can try
Start/control panel/network connections/right click/properties/ local area/general
right click (internet protocol tcp/ip) go to properties this should be set at obtain ip address automatically. you could try setting it manually

Jul 16, 2008 | PC Desktops

1 Answer

Ethernet Card


Do a ipconfig at the command prompt and see if you are being assigned a ip from the modem. If not try rebooting the modem with the ethernet connected to modem and computer. then do ipconfig again to see if not getting internet ip, your card or modem eternet is bad. put in a new one and try again.

Jun 01, 2008 | HP PAVILION A6230N DESKTOP PC

1 Answer

I cannot set up my Linksys wireless router model number:WRT54GS to work properly. I have a desktop computer with Windows XP operating sysyem. I have three other laptop computers with wireless components


Hi,

The easiest would be to connect your desktop straight to your modem and verify that you can connect to the Internet. Do not use the LinkSys WRT54GS yet. Pop in the CD that came with the WiFi Router and run the setup wizard. Follow exactly on screen instructions. Verify that your desktop's networking is set to auto obtain IP address.

Alternately, you can try:
1. connect your desktop with a straight through LAN cable to Ethernet Port #1 of the WRT54GS;
2. set your desktop to use IP-192.168.1.10, Subnet Mask-255.255.255.0, Default Gateway-192.168.1.1;
3. open a browser and goto 192.168.1.1. use the LinkSys supplied username and password;
4. verify/configure/set the LinkSys to your preference;
5. for the time being do not use any security keyphrase, WEP WPA or MAC filter;
6. verify that your laptops could see the router's SSID;
7. verify that all laptops are set to auto obtain IP addresses;

If for some reason neither method will not work, pls post back with your modem's make & model.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 07, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...