What password for pairing cannot activate device via iphone

I think what you are asking is how to connect the headphones to the iphone via Bluetooth.
switch on the headphones Bluetooth....go to general settings in iphone ... Switch on iphone Bluetooth....then choose detect devices....when it finds the headphones... Click "pair" ...it will let you know if pairing was successful.once it remembers the device you won't need to do all that again next time you want to use the headphones.now and again you will need to charge the headset up.

did you mean via bluetooth? if yes please remove saved car kit devices from you phone and then try again with correct pass-codes

The pairing code for the CK3100 is 1234.

You can find the manual via the link below

www.parrot.com/uk/support/userguides/#MKi9000

open your Bluetooth menu and first activate Bluetooth on both phone in which between you want to exchange data.. now..from one phone search for blue tooth device ...it will shoe the name of other device after searching....now click that phone and it will ask for a password..enter any 3 or 4 digit no and click ok..now in other phone click yes and enter same password there..now your phones will b paired..an you can sent data to each other......U can choose any object ..then go to option there will be a send option click that and use via Bluetooth.now select the to which you want to send data...

you cannot send or receive data on the iphone via the bluetooth, the bluetooth is only to use with devices like hands free

sorry

nick

To your diappointment the Iphone cannot send photos, songs, or anything like that, yet. What you can try is restoring your Iphone and then see if you can pair it with your device. If that doesn't work, then it just means that the device you are trying to pair with it non-compatible with the Iphone.

The procedure for sending the data via BT is hat you make your device and the receiving device visible. Pair with the receiving device by clicking on it. Give the same password to both devices when asked for. Authorise the receiving device. Then you can send as much data as you want.

The following has worked for me FLAWLESSLY :

1) Remove any old "pairing information" that you may have both on the iPhone and on the TomTom - both should be "clean" not knowing about each other..

2) Put iPhone into airplane mode.

3) Go to settings, and turn on Bluetooth

4) Do the regular "search for bluetooth device" and pair the two
devices

5) Turn off airplane mode

After I did this, I have never had a problem with iPhone 3GS / Tomtom - they find each other now every time, and all is happy..

you have to make sure that bluetooth is turned on.

go to your home screen, touch settings, then general, then bluetooth, make sure the bluetooth switch is set to on.

Then follow your directions for the your headset for pairing, usually it involves holding the power button down for so many seconds, then it will enter a "pairing" mode where the headset is able to be seen by phones.

Once that happens it should pop up on the bluetooth page of the iPhone and it will ask for the devices password. Most devices the default password is 1111.

Hope this helps and enjoy your Iphone, I know I do ;)

put the music player on and press down on the jogwheel, select 'Play Via' and change it to Bluetooth stereo headset. It'll prompt you to open the swivel and take you to the bluetooth devices screen where you select the correct device, it'll then prompt you to close the swivel and will start playing through your headphones :-) Is that what you mean?... It's a bit of a pain really :-(