Question about LG 42LC2D 42 in. LCD HDTV

1 Answer

We try to terun on the TV, the blue light is on and the TV do not work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • LG Master
  • 11,800 Answers

If only the blue line is on - nothing else - that means that the power source has been shut down. How this happened: in your tv there is a faulty board - on your model it's usually the inverter board, the board that powers the CCFL tubes that provide the back lighting; when you try to start the tv the power source of the tv gets activated and it starts to deliver the current to all the other boards of the tv; the faulty board absorbs way more current that it should - this is detected by the power source who goes full power to compensate; but this isn't enough and the voltage drops - this triggers the protection system of the power source who shuts it down by force. When the protection system is activated you just can't do anything else but to unplug the tv from the mains.
The only way to fix that is to repair or replace the faulty board and this is a job for some one with electronics experience - time to call one.

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue light turns on but tv screen stays blank


The blue light indicates power is getting to your TV but there may have been failure of the internal power supply

Jul 07, 2013 | Sceptre Televison & Video

1 Answer

Insignia tv light blinking red and blue


you have a faulty parts inside..try to disconnect one by one the supply of all board until you get stable lights..

Jun 14, 2012 | Insignia NS-LCD42HD-09 42 in. HD-Ready LCD...

1 Answer

Any ideas on what to do for an element tv that won't turn back on..the red/blue light is not on either. It was working fine and when I shut it off the red/blue light went out also now I can't get it back...


Tries tv unplug,replug it back like about an hour.By letting the tv resetting itself back to the tv factory setting.Now,the tv should be working again.If it still have the same result.Mean the tv power supply board,that the board where the power a/c plug into it.The causes and the problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Jan 24, 2011 | Element Electronics FLX-3211B 32 in. LCD...

1 Answer

Tv does not come on. only blue light is on and


When my tv did this I unplugged power waited ten seconds and replugged it worked.

May 14, 2010 | Olevia LT42HVi 42 in. LCD Television

1 Answer

Stopworking try to start hear timer clking no spin ty.


I had the same problem. Called whirlpool to get some help but they said that I would have to call someone to come out and look at my dryer (to much money) so I got online and tried to see if anyone had the same problem, one sight I found said that it could be the thermal fuse so I took my chances and order one online, and sure enough that is what it was.. Saved me so much money!

May 07, 2009 | Dryers

1 Answer

Tv troubleshooting


I have a 61" JVC that just stoped working. I turn it on and nothing bu the blue light stays on and the red light blinks 8 times and then the blue light joins in.

Oct 30, 2008 | JVC HD-61Z575 61" Rear Projection...

2 Answers

CONTROL PANEL


go to pages 2-11 on in

http://www.feedroller.com/Store/Service%20Manual/E210.pdf

and you'll get all the light pattern decoded

good luck,
/JDe

Apr 13, 2008 | Lexmark E210 Laser Printer

Not finding what you are looking for?
LG 42LC2D 42 in. LCD HDTV Logo

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...