My Belkin F5D7663 will not connect to the internet. I have it connected to my desktop pc by ethernet cable and the connection netween them is fine. When I go on the routers IP address it is saying that the internet is not connected. I had added my username and password etc on routers set up wizard but it will still not connect. Can anyone help?
HAVE U CHECKED WITH THE RAS,THROUGH WHICH IT'S CONNECTING....
AND ONETHING MORE...U MIGHT BE USING SOME DIALING NUMBERS....
JUST CHK IT BY DIALING THAT NUMBER..WHETHER U GETS A PERFECT DIAL TONE OR ENGAGE....
OR U DO ONETHING JUST GET RESET YOUR CONNECTION
BY RESETTING YOURS USER/PASSWORD...
I THING IT MIGHT HAVE HANGED ON RADIUS....
AFTER DOING THESE ALL...
U JUST CONFIRM ME...
An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: My Belkin F5D7663 will not connect to the net
Make sure you unplug the power from the cable modem for atleast 30 seconds and reconnect it. make sure the ethernet cable is plugged to the router NOT the pc. What's happening is the cable modem is obtaining the Mac address of your pc, and once you change the cable to the router, the modem is still looking for the original address it obtained earlier.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, 1.Connect a Cat5 cable into the Ethernet port on the back of your cable or DSL modem. Plug the other end of the cable into the "Connect to Modem Internet/WAN" port on the back of the Belkin Router. 2.Connect a Cat5 cable into the "Ethernet" port on the back of any desktop or stationary computers and then plug the other end of the cable into one of the LAN ports on the back of the Belkin Router. Start with port one and work your way up with subsequent computer connections. 3.Turn the Belkin Router on by plugging the router into a power outlet. Allow 30 seconds for the router to fully boot up. All computers tethered to the modem via a Cat5 cable have access to the Internet. 4.Open the Wi-Fi Wizard on your laptop and turn on the Wi-Fi antenna. Once turned on, the Wizard finds all network connections in your area. Connect to your network to establish an Internet connection. Complete this step for each computer not tethered to the Belkin Router with a Cat5 cable.
the ethernet cable should be connected to the ethernet port of the router to the ethernet/network port of the computer. you will also need to connect a cable through the router and the modem, then a phone cable from the modem to the phone line.
You are splitting your bandwidth, which is apparently insufficient to run the Belkin and your desktop. I am betting that you are connecting the Belkin to the ethernet in your Desktop, rather than connecting the Belkin to your modem and then connecting the desktop to your Belkin.
Does your router have one LED lamp for each "wired" port?
If so, does unplugging the Ethernet-cable (the one that connects to your desktop PC) cause the lamp to go off?
Does reconnecting that cable cause the lamp to go on?
Also, on your desktop computer, there could be a lamp right beside where the Ethernet-cable connects into your computer.
Again, disconnect the cable, and reconnect the cable, to see if that lamp goes off/on.
Have you tried a different cable?
Do *NOT* connect your desktop computer to the 'WAN' port on the router -- connect it to any of the "LAN" ports.
When your router is hooked up to your computer through ethernet. Type in 192.168.1.4 in there you'll have router cofiguration. You can edit and possibly go through steps to connect your router to the internet.
Check that the wireless drivers are installed properly on both your laptop and desktop. THe certificate error is because your laptop does not "trust" your computer. Under network conections click add a connection ec, and when you try to conect, microsoft should ask you weva to trust the connections from computer to computer that should do it :D
it will as long as the modem/router is connected to a phone line, instead of the pc, the only cable connected to the pc should be a ethernet cable; or you have the pc networking set that it connects via another pc instead of through a gateway, re run the wireless network wizard.
I had this model of router quite some time ago. I had some bad experiences where when I tried to login to it I was unable to, the web based management interface would not respond (as you have described) . Resetting the device would resolve this I would recommend trying that. Unplug it, wait a few minuets and plug it back in. Then try again to access the management interface. 192.168.1.1 or 192.168.0.1 or whatever via a web browser.