Question about Philips Televison & Video

1 Answer

My philips tv just went out. it's making a clicking sound then cuts off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 597 Answers

Hello,

If your television goes off all of a sudden and all you get is clicking sound from the unit.

My best bet is either you are having a faulty lamp or there is a bad capacitor on either the main panel or the power panel.

Unplug the television for about 2 hours, then you unscrew it open, check the lamp to see if it is faulty, if it is, then all you have to do is to replace it with a new one.

But if it is not faulty, then you have to assess both the main panel and the power panel for bad capacitors, once you find any, replace it with a new one, and the television will be in good condition once again.

Take care and good luck

Posted on Nov 06, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 100 Answers

SOURCE: Phillips TV clicking sound, then cuts off

The problem of that is a loose solder on the board..

Posted on Aug 07, 2009

budmrtn
  • 11361 Answers

SOURCE: My philips tv is making

It may have bad power supply due to bad caps, etc, or it detects over current draw so it goes into shutdown and try to restart again over and over.
Please read myguides first if you are going to DIY repair.
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

Posted on Jul 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No color in DLP tv


Sounds like it is the Color Wheel !
Encompass Parts Distrubtion 1-800-638-3328
Visit Website and type in your model number.

Mar 29, 2010 | Philips 50PL9126D/37B 50" DLP TV

2 Answers

Phillips TV clicking sound, then cuts off


The problem of that is a loose solder on the board..

Aug 07, 2009 | Philips 52PFL7422D/37 TV

1 Answer

Philips 27PT6441/37


There is a install kit 483531057673 for this model when the set is dead. The kit will contain 7404 and the Horizontal Driver Transformer 5402 along with resistors that will limit stress on 7404 and includes complete instructions

May 03, 2008 | Philips 27PT6441 27" TV

3 Answers

Philips 60pp9202 rear projection hdtc


The quick answer to you problem is critical in what your set was doing prior to it shutting down. Do you remember it having a Color problem like alignment of convergence? Was the sound cutting out on you? Or was there part of the picture missing? If one of these then you could eliminate time and money. To be honest you would save money DIY. You also can call PTS at 18008447871 and get the price on Deflection board or Large Signal, whichever has High Voltage Transformer on it and price. This will save time troubleshooting, because it takes the knowledge of knowing voltages, components, etc. Which require skills the average person may not have. Hope this helps!

Sep 21, 2007 | Philips 60PP9202 60" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...