Question about One For All URC 7740 Remote Control

1 Answer

One for all remote 4 urc 7544 old model need code for samsung 5 series tv

Tried quick search but to no avail just wondered if code is not out or model is too old

Posted by on

1 Answer

Lost the code book /i have a sanyo tv cannot remember the codes for it

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to tune sky remote without code


Hi There, I have a Hisense 81 cm Plasma PDP 3208 TPW 3208
I need code for my urc-7544 so I can use the remont on this TV
Thank you
Nelson
Cape Town
S A

Aug 16, 2009 | One For All URC 7740 Remote Control

1 Answer

Need the code please


SEARCHING FOR YOUR CODE
If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, to search for a code
for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED
blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SET until the LED blinks twice, then
release SET.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for.

I found this off a urc-4605 manual online but I think it works for all models worked for my urc4640b00

May 19, 2009 | One For All URC-5705 Remote Control

2 Answers

I have a URC 4330B04 and i need the code for a sylvania tv model


Hi,

0054, 0030, 0020, 0096 - Sylvania TV codes, but not sure if for urc 4330.. try them anyway.

If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, to search for a code
for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED
blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SET until the LED blinks twice, then
release SET.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for.

I copied that from the manual. You can download it on the link before after entering a four digit code (funnily enough!)

http://safemanuals.com/user-guide-instructions-owner-manual/ONE%20FOR%20ALL/URC%204330-_E

Hope this helps

Chris (ziraffa)


Dec 23, 2008 | One For All URC-4330 Remote Control

2 Answers

One For All URC-7544 Remote Control


Try these codes good luck 0035 0553 0508 0243 0036
0070 0102 0217 0109 0490

Nov 26, 2007 | Remote Controls

1 Answer

I have a 1 4 all remote model urc-7544


Hello, follow this link to download the manual and the codes for your remotes:
http://www.sparky-uk.com/one-for-all-digital-4-urc-7544-universal-remote-control-7-p.asp
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(www.sparky-uk.com)

Sep 27, 2007 | Remote Controls

8 Answers

Need codes!!!


1. Go to http://www.urc.philips.com/ 2. choose US URC modles 3. choose US2 4. choose US2-P63S. Really dumb but the owners manual states PH601S but in Philips web site its called US2-P63S -

Sep 07, 2007 | Remote Controls

Not finding what you are looking for?
One For All URC 7740 Remote Control Logo

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...