Question about JVC AV-56WP74 56" Rear Projection HDTV-Ready Television

1 Answer

Red - green and blue seperation after a storm

I turned on my TV and all the colors were seperated - everything is out of focus - like a triple images . Tried to set convergence and the will not align.
I also noticed that my remote will not turn on my jvc. I have to turn in on manually.

Posted by on

  • Matties Jun 15, 2008

    IHello,



    I have a JVC AV-56wp74. My screen is basically red and blue with ghosts. Converge didn't work. Everything is double worded in red.



    Any ideas?



    Thanks,



    Sindi

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 8,617 Answers

The convergence Issue is caused by your convergence ICs needing replacement you will need to replace both convergence ICs they are STK392-110 and you can get replacements at the following link and they provide free instalation instructions with the ICs and if you leave them an email indivating the problem with your remote and your model number they will also have the small sensor that your TV needs and they can tell you how to test wether the remote is at fault or if its the sensor itself that you need.Heres the link.
http://servicemanuals.vstore.ca/

Posted on Jun 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Convergence problems w the color tubes


Press the Majic Focus button on the front. If that doesn't fix it then the convergence ICs may be bad.

Mar 31, 2010 | Sony KP-51WS500 51" Rear Projection...

2 Answers

Blurry and colors are seperated red green white


if you are viewing from a projection tv, chances are you have to go thru the menu of the tv to 'picture tuning'. here it gives you different things that could be fixed. one to look for is 'lamp alignment'. It should show all the colors and lines with directions to bring them into focus. This should fix the blurriness and 3-d red/green/white separations. hope this helps you!

Aug 16, 2009 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Green color seperation multiple images convergence will not fix


Your TV most likely a convergence failure. ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem


  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
Here are some photos of convergence problems.

3dc9420.jpg
645fba6.jpg
0dcec37.jpg
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

0667c5f.pngSOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.

May 14, 2009 | JVC AV-48WP74 48" Rear Projection...

1 Answer

Tripe image, blue, red and green color on image, not focus


you will need to replace the two STK392-560 ICs and also check the 4.7 ohm 1/2 watt resistors and the six 3.5 amp pico fuses.

May 05, 2009 | Sony KP-57WS510 57" Rear Projection HDTV

1 Answer

Color seperation on rca 1998 46" rear projection tv


projection tvs have seperate color bulbs that put out the same picture the lenses just need to be adjusted. they probably shifted during the move.

Dec 04, 2008 | Projection Televisions

3 Answers

Red and Green


check video IC or tv convergence sometimes yoke

Aug 12, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Color doesn't line up


you need to replace both convergence ic's they are located on your D board mounted right on the 2 big heat sinks you should either need STK-392-560 or STK392-510's you can find which one on stamped on the side of your old ic's. you can go to this sight and get them at reasonable prices plus picture installation instructions and free online tech support if you need help. By doing the repair yourself you will save between 4-500.00 for about a 45min repair
http://servicemanuals.vstore.ca/

Apr 25, 2008 | Sony KP-57WV600 57" Rear Projection...

1 Answer

Double image/ out of focus with green and blue seperation


Your tv is crt-based and is out of convergence. In other words, the settings for keeping the Red, Green and Blue images aligned have drifted and must be reset. This is common with CRT projectors and CRT rear projection tvs.

Refer to your owners manual for instructions on re-aligning it.

Apr 18, 2008 | Hitachi 51UWX20B 51" Rear Projection...

1 Answer

Toshiba 43H70 HD Projection TV


this is a convergence failure, there are hundreds of posts about it on this website you should be able to find everything you need

May 23, 2007 | Toshiba 43H70 43" Rear Projection...

Not finding what you are looking for?
JVC AV-56WP74 56" Rear Projection HDTV-Ready Television Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...