Question about Philips Magnavox Learning Universal Remote
I have a SANYO TV can you help me with the code number i have a philips universal cl034 please.
Try this site:
It's the manual for a Phillips remote control. The codes should be rather universal. Otherwise, there is a way to program it without using a code.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.
Hope this helps :)
Posted on Jun 18, 2008
Tips for a great answer:
Oct 29, 2009 | Philips Magnavox Learning Universal Remote
Sep 23, 2009 | Philips Universal PH301S Remote Control
Sep 12, 2009 | Philips Magnavox Learning Universal Remote
May 02, 2008 | Directed 434MHZ Remote Control
Apr 29, 2008 | Philips Magnavox Learning Universal Remote
Mar 14, 2008 | Philips Magnavox Learning Universal Remote
Dec 15, 2007 | Remote Controls
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: