Question about Sharp MX-2300N Color Copier

1 Answer

What does Maintenance needed, Code TA mean? - Sharp MX-2300N Color Copier

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Most of the time it means nothing. Do this.
On the consol, press # * C *,,,,,,,,,,,,,,, or P * C *.
Then enter the number 24,, press start. Then press 4, reset that counter. then 24 ,,, 5 reset that. 24,,,, 7 reset that .
The machine should run fine. Those are just numbers that are entered in the memory to make money most of the time.
If there is a problem , let me know the symptom

Posted on Nov 05, 2010

  • Antonio
    Antonio Jan 17, 2014

    I have de same problem and besides got horzontal lines of colors and one bigger in black color. I cleaned laser as shonw in manuals and I think it needs to be changed the image drum in the side under the fuser. Is that correct?. Thank you

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sharp MX-C311 shows maintenance required Code TA


Hi, TA code refers to maintenance all counter has reached its specified limit. This usually means all the consumable parts have reached the end of their service life. If you have a maintenance contract with a Sharp dealer then they should replace all the units that require replacing & reset the maintenance counters for you, if you don't then, if the copy quality is still ok, you should be able to continue to use the machine as normal.
Hope this helps.
Dave.

Oct 15, 2017 | Sharp Office Equipment & Supplies

2 Answers

TA code


TA is like the universal maintenance counter, on this model only one code is displayed at a time. hold the copy key to figure out how many copies have been made on your machine and then call your
Sharp dealer they can tell you what is do to be replaced.

I’m happy to help further over the phone at https://www.6ya.com/expert/ethan_e84416e0b13809d2

Mar 27, 2014 | Sharp Mx-2600n MFP Copier

1 Answer

Maintenance required code TA


This is a scheduled maintenance error. It can be reset, but if you see it on the screen you likely need some preventative maintenance. If you're in the Houston, TX area we'd be glad to be your servicing dealer.

Feb 24, 2014 | Sharp MX-4111N Copier w/ 36 Month Warranty

1 Answer

Msg on my Sharp MX2300N


The TA code refers to the maintenance cycle of the copier. Its the copiers way of saying ''come and see if im ok''. I would recommend resetting the maintenance counters for your drums, developer, fuser and transfer belts. This can be done in the engineers menus.

May 06, 2013 | Sharp MX-2300N Color Copier

1 Answer

Sharp printer MX-2301N Code TA


Hi,

Thanks for choosing FIXYA.

Maintenance TA is indicating the machine has reached its 100K scheduled service interval. It requires Transfer Belt Unit, Usually Black Drum & Developer, any feed rollers wornout replaced, any old firmware updated to latest version, and a general clean & check. It is reset in service mode once these parts are replaced.

Have a nice day.

Jan 18, 2012 | Office Equipment & Supplies

1 Answer

Maintenance code TA does the printer go offline


Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you.

Jun 05, 2010 | Sharp MX-2700N Color Copier

1 Answer

Maintanance required code TA


Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you

May 11, 2010 | Sharp MX-2300N Color Copier

1 Answer

Hello, We have a sharp mx2700n and it says: maintenace code TA is there any code wich makes this undone? thx in advance


Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you

Mar 01, 2010 | Sharp MX-2700N Color Copier

2 Answers

Sharp MX-2300N Maintenance required.code:TA


Maintenance TA is indicating the machine has reached its 100K scheduled service interval. It requires Transfer Belt Unit, Usually Black Drum & Developer, any feed rollers wornout replaced, any old firmware updated to latest version, and a general clean & check. It is reset in service mode once these parts are replaced.

Dec 23, 2008 | Sharp MX-2300N Color Copier

Not finding what you are looking for?
Sharp MX-2300N Color Copier Logo

925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

257 Answers

k24674

Level 3 Expert

8080 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...