Question about Office Equipment & Supplies

1 Answer

Waste Ink Absorber full on Pixma MP 150 printer

Posted by on

  • 1 more comment 
  • Anonymous Jun 14, 2008

    epson c64 Waste Ink Absorber full

  • Anonymous Oct 01, 2008

    I have to replace my ink absorber,where can I do that,and how much is it going to cost?

  • anne macca Apr 05, 2009

    Cannon Pixma printer will not print because it's waste ink aborber is full. Can anyone help?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Before we start what needs to be done is that the two little filters under the printer carts need to be cleaned as well as the two little rubber parts housing the filters; wash these in water (after taking out of the printer) the filters should come up white-ish.

Also make sure that while you have the filters out to clean in and around that area with a cloth / tissues something to absore excess ink. After you clean this however you still need to service resert your printer.

The method for doing so is worded very badly on alot of sites so I will explain my way.

(1) have your printer power down ie. off, just to make sure pull the plug out and wait 10 seconds.

(2) plug printer back in, now Hold down the Stop/Reset button don't let go.
(2a) push and hold the on/off button

----at this point both fingers are holding down the buttons.----

(3) take your finger of Stop/Reset, pause maybe a second now press stop/reset button once and then press again and hold.

--- both fingers at this point are hold down both buttons----

(4) take your finger off on/off and now finally take your finger off stop reset.

---wait for the printer to go into its service mode ie. wait maybe 30 secs a min whatever till the printer carage has moved back into ints original spot.

---after this has occoured you should be able to press Stop/reset to cycle though the options

each time you press Stop/Reset Alarm and on/off should alternate lighting up. Hope this helps.

0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

Posted on Jul 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon PIXMA MX700 is not turning on! I have checked all the cords even moved from one outlet to another and its still not turning on. Should I just purchase an new one this model is an old on


Do you have a CD to install this printer? if you do go into MY COMPUTER where you can erase things and erase the printer and its system then shut computer off and restart then reinstall the printer using your CD to reinstall it. Some times you have to delete things and reinstall them to work.

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

Bizhub C250 using to much toner. Images are very dark. Ink can even be rubbed off pages. How do you adjust?


Check that the fuser is not in enevople mode. two green handle up not down. check the files

Oct 28, 2016 | Konica Minolta bizhub C250 All-In-One...

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

B&w/gray Scanning Is Okay But Color Scanning Problem


Run ink head cleaner routine. If you cannot the list make and model of printer. Thanks.

Dec 25, 2014 | Office Equipment & Supplies

1 Answer

Why is print quality poor after inserting new ink. Copies are faint and have lines


the cartridge is clogged with ink that has dried and reduced the slit. you need to replace the cartridge with a new one. it happens usually if you recharge the cartridge 3 or 4 times with compatible ink.

May 07, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

752 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

100304 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

66302 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...